Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Amcor Dateigröße: 637.28 kb Dateiname: Unterrichtssprache:

Bacteria carried by the air are being killed by the TiO2 filter. STORAGE If the dehumidifier is not used for long periods of time, follow these steps: • disconnect the unit and wrap the power cable. • if used, empty the water container, remove the scent emitter . • clean the unit and filter, pack it in its original packaging or cover to protect against dust. • store the unit in an upright position in a cool, dry place away from access by children. 11 12 GB When the water tank is full, the unit will switch off and beep 10 times, the blue led on the control panel will become red and the icon on the LCD will come on. At this time please empty the water tank as follows: • open the front door • pull the water tank partly out by the recession at the bottom of the tank • raise the handle, carry the tank to the drain point and empty the water by the small triangle opening in the cover of the tank • once emptied, gently push the tank back into its place checking that the icon goes out and the red led turns back to be blue. EMPTYING THE WATER TANK To clean the water tank follow these steps: • turn the handle to the position where the notch on the handle’s hinge matches the slot in the water tank • pull the handle out of its place in the water tank and take the handle off • take off the cover • clean the water tank • put back the cover • return the handle to its place. 13 GB CONTINUOUS DRAINAGE (OPTIONAL) For the continuous drainage please refer to the following instructions and pictures : 1. Cut out the hole for the drainage tube on the back of the unit. There are 4 tiny strips holding the cover in the hole, just cut them and the cover will come out. 2. Push the supplied drain tube through the hole in the back of the unit and fix it on to the plastic drain tube. 3. The water tank have to remain in place also in the continuous drainage. 4. Make sure that the drain tube will have a continuous downward slop all the way to the drain point. 5. Do not insert the edge of the drain tube below the water level. SPOT DEHUMIDIFICATION Normal dehumidification Before you start the unit, open the air outlet grill located behind the control panel to direct the dehumidified dry air run up according to your wish. Spot dehumidification Your dehumidifier has got a unique feature. Besides dehumidifying the air in the room it can at the same time dehumidify humid spots like closets, shoes, dresses etc. by a flexible hose connected to the rear panel: • take off the cover of the scent emitter • take out the scent capsule • screw the flexible hose into its adapter • connect the adapter to the opening in the rear panel • close the air outlet panel on the top of the unit • run the unit. GB GB TROUBLE SHOOTING Never try to repair or dismantle the unit yourself. Before calling for assistance please check the points below. The unit doesn’t run. Is the machine plugged in? Is the mains power supply on? Is the water tank full indicator on? (If so, the water tank is full or it isn’t positioned properly). The unit seems to extract little water. Are too many windows or doors open? Is there something in the room producing lots of heat? Is the room cold – the colder the air the less moisture the unit will extract. Is the filter dirty? Is the room humidity already quite low? The unit seems to do nothing. Is the filter dirty? Is the air intake or outlet blocked? Is the room humidity already quite low? Is the room temperature below 5 °C? The fan may run without the compressor. Too noisy. Is the machine positioned unevenly so as to create vibration? Is the floor underneath the unit uneven or loose fitting? Is there any foreign body interfering with the unit? The unit’s fan doesn’t seem to be revolving. Is the filter blocked? Is there any foreign body interfering with the unit? The continuous drainage is not working. Does the hose have a downward slope throughout its entire length? Is there a kink or sharp bend in the hose? TECHNICAL DATA Model PLDA 19EH PLDA 25EH Mains 220 - 240 V / 50 Hz Power consumption (at 32 °C, RH 90 %) W 300 390 Heater W 600 Moisture removal (at 32 °C, RH 90 %) L/24h 18 24 Refrigerant R-134A Refrigerant load g 155 200 Working temperature °C 5 - 35 Dimensions (W x D x H) cm 42 x 24 x 60 Net weight kg 16 16.5 Due to our continuous R+D program, specifications may change without prior notice. For current specifications please refer to the rating label on your machine. 14 ................H ................E ................................................................ ...................................................... ............................................ ................H .................................... .................................... ........................................................N ..........................N ................E .............................................................. .................................................... .................................... ..........................N ...

Herunterladen

Geben Sie zwei Ziffern: