Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• Never connect two or more extension cords together. • Use the shortest extension cord possible. • Keep connections dry and off the ground. • Avoid draping the electric heater cord where children or animals could encounter it. Before Turning “ON” 1. Make sure all labels, packaging and protective films have been removed from the heater. 2. Heater should be thoroughly inspected before each use, and by a qualified service person at least annually. Turning “ON” Illustration 1 1. Plug the power cord into a dry GFI (Ground Fault Interrupter) 3 plug outlet. (Illustration 1) 2. Push the power button. (Illustration 2) Note: The red LED light will glow while the heater is on. Note: When restarting the heating element will start up slowly before getting to full power. While Heater is “ON” If heater tips over, the heater will automatically turn “OFF”. If heater tips over: 1. IMMEDIATLEY unplug power cord from the wall outlet. 2. Carefully turn the heater upright. CAUTION: Dome, pole and shroud cover may be hot. Use heat resistant gloves to set heater upright. 3. Inspect heater to ensure no damage. If no damage continue to next step. If there is damage call a qualified technician to inspect and make any necessary repairs. Do NOT use the heater if there is any sign of damage. A qualified technician should inspect and make any nescessary repairs before the heater is used again. 4. Plug the power cord into a dry GFI (Ground Fault Interrupter) 3 plug outlet. (Illustration 1) 5. Push the power button. (Illustration 2) Note: The red LED light will glow while the heater is on. Note: When restarting the heating element will start up slowly before getting to full power. Turning “OFF” 1. Push the power button. (Illustration 2) 2. Unplug the power cord from the wall outlet. Cleaning Surfaces 1. Wipe surfaces clean with a solution of water and mild dishwashing detergent or baking soda. 2. Wipe clean with damp cloth. Note: While cleaning your unit, be sure to keep the area around the heating element dry at all times. Do not submerge the heating element. If the heating element is submerged in water, do NOT use it. It must be replaced. Maintenance Illustration 4 To enjoy years of outstanding performance from your heater, make sure you perform the following maintenance activities on a regular basis: 1. Keep exterior surfaces clean. 2. Air flow must be unobstructed. Keep circulating air passages around the heating element clean. Replacing the Fuse 1. Push the power button. (Illustration 2) 2. Unplug the power cord from the wall outlet. 3. Using a screwdriver, remove the fuse cover. (Illustration 4) 4. Carefully remove the old fuse, and replace with the new fuse. (Illustration 5) Note: ONLY replace the old fuse with a 250V 15A fuse. 5. Reattach the fuse cover. Note: Do not over tighten 6. Follow the Turning “ON” instructions or the Storage Instructions. Remove fuse cover Illustration 5 Remove old fuse Storage Between Uses and During Periods of Extended Inactivity or When Transporting: 1. Push the power button. (Illustration 2) 2. Unplug the power cord from the wall outlet. 3. Store heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris). 4. If desired, cover heater to protect exterior surfaces and to help prevent build up in air passages. Wait until heater is cool before covering. Connecting the power cord to a dry GFI 3 plug outlet. Illustration 2 Power button Cleaning and Care Notices 1. Abrasive cleaners will damage this product. 2. Never use oven cleaner to clean any part of heater. 3. Do not clean any heater part in a self cleaning oven. The extreme heat will damage the finish. 4. Inspect heater before each use. 5. Have heater inspected annually and repairs should be made by a qualified service person. 6. Do not clean heater with combustible or corrosive cleaners. Use warm, soapy water. 7. Do not paint engine, engine panels or dome. 8. This heater should be thoroughly cleaned on a regular basis. 9. After a period of storage and/or non use, inspect for any abrasion, wear or cuts to the power cord. ® Outdoor Electric Patio Heater Model No. EWTS830SP Product Registration Specifications For faster warranty service, please register your product immediately at or call 1.800.762.1142. Limited Warranty Blue Rhino Global Sourcing, Inc (“Vendor”) warrants to the original retail purchaser of this product, and to no other person, that if this product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such product shall be free from defects in material and workmanship. Vendor may require reasonable proof of your date of purchase. Therefore, you should retain your sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement of parts, which prove defective under normal use and service and which Vendor shall determine i...