Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area and where it will not be tripped over. • Do not use on soft surfaces, like a bed, where openings may became blocked. • Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair. • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may causes an electric shock or fire, or damage the heater. • Use this heater only as described in this manual. Any other uses not recommended by the manufacturer may cause fire, electric shock, or injury to persons and may void warranty. • Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord must be No. 14 AWG minimum size and rated not less than 1875 watts. • Do not use outdoors. • This product uses a polarized plug (one pin is wider than the other). To reduce risk of electric shock, this plug must be fit in a polarized outlet in one way if the plug does not fit fully in the outlet, turn the plug around and insert again. If the plug still does not fit fully in the outlet, Contact a qualified electrician. Do not attempt to defeat or remedy this safety feature yourself. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. SAVE THESE INSTRUCTION 3 Vt-174 6.qxd 18.05.04 11:27 Page 8 ELECTRICAL CONNECTION Before inserting the plug in an electrical outlet, check carefully to make sure that the voltage in your home's electrical system matches the voltage indicated on the appliance and that the socket and main feed are of a size sufficient to power this appliance. KNOW YOUR FAN HEATER HEAT SWITCH FUNCTIONS Functions are selected by turning rotary switch to the desired position. HIGH - Provides 2000 watts of heat output operation; LOW- Provides 1000 watts of heat output operation; FAN - Fan only operation for cooling comfort; OFF - Will power the unit off. SAFETY SYSTEM • In the event of abnormal overheating, A safety device shuts down the appliance. Remove the plug from the socket and let the appliance cool down for at least 20 minutes. Put the plug back into the socket and switch the heater on. 1. Front Grille 2. Power indicator 3. Heat select Switch 4 РУССКИЙ "FAN" - только вентилятор; "LOW" (низкий уровень нагрева) - для небольших помещений - 1000 Вт; "HIGH" (высокий уровень нагрева) -для больших помещений - 2000 Вт; • Для вентиляции помещения установите переключатель режимов работы (3) в положение "FAN" ("Только вентилятор"). В данном режиме работы обогрев помещения не осуществляется. • По окончании работы, установите переключатель режимов работы (3) в положение “OFF” (Выключено), и выньте с...