Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Superior Dateigröße: 366.32 kb Dateiname: Lennox_Superior_Installation_Edge_Trim_Kits_750058M.pdf Unterrichtssprache:

Remove fireplace grille assemblies by lifting up and out of holes on frame. Then pull from bottom out towards you. (Figures 1 and 2). Note: Lift grille near outer support rods to fully clear holes. Step 2. There is a right hand and a left hand trim. Install side trims carefully. Place trim on side frame and press firmly to fit around frame (Figure 1). Step 3. Install the top frame trim with two screws as shown in Figure 2. Note: The ends should overlap the side trim pieces a little. Step 4. 42 Models only. Install one of the two upper mounting frame trim pieces by aligning the three holes of the trim to the three holes of the fireplace. Fasten with three screws. Step 5. 42 Models only. Install the lower mounting frame trim. Align the two holes of the trim to the two holes of the fireplace. Step 6. 42 Models only. Align the two end holes of the second upper mounting frame with the holes on the lower fireplace frame and secure with two screws. Step 7. Adjust all trim pieces and ensure that all screws have been tightened. Reinstall louvers. Step 8. Remove protective covering from trim pieces and wipe with a damp cloth. Step 9. Reinstall louvers. Figure 1 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Top Trim Figure 2 Step 3 Step 2 Screws '»S Side Trim FireCraft Technologies reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. FireEICraft TECHNOLOGIES Printed in U.S.A. © 2000 by FCT P/N 750,058M REV. B 11/2000 4325 Artesia Avenue • Fullerton, CA 92833-2522 714-521-7302...

Herunterladen

Geben Sie zwei Ziffern: