Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Sunbeam Bedding Dateigröße: 325.99 kb Dateiname: 5ae850c1-fd18-42b8-8c94-779c19cdbc32.pdf Unterrichtssprache:

Tip over cut-out Should your heater accidentally be knocked over, the instant tip over cut will automatically interrupt power to the heating element and fan. The heater will not resume operation until it is replaced in the upright position. Power/Mode light The power light illuminates amber to indicate that the heater is connected to the power outlet and is set to AUTO mode. It illuminates green when the heater is set to MANUAL mode. 4 Features of your 2000W Micro Furnace heater 5 Temperature light The temperature light illuminates red once the selected temperature level is reached. Removable dust filter The filter collects dirt and dust from the air circulating through the heater. It is removable for easy cleaning. Mode/Standby button Use the standby button to select the desired operating mode. Pressing the standby button once selects the AUTO mode, twice selects the MANUAL mode, and pressing a third time selects the STANDBY mode. AUTO mode Select AUTO mode for thermostatically controlled operation. MANUAL mode Select MANUAL mode for constant heat output at your desired heat level, from setting 1 to 5. LED screen The LED screen displays the ambient room temperature, and the selected setting during adjustment. + and - buttons Use the + and – buttons to adjust the selected temperature when in AUTO mode, or to select the desired heat setting when in MANUAL mode. Features of your 1500W Micro Furnace heater Mode dial Use the mode dial to select the desired operating mode: FAN to circulate cool air; HEAT to operate the heater, or OFF. Thermostat dial Use the thermostat dial to select the desired temperature, from 10°C to 27°C. Once the selected temperature level is reached, the thermostat will contantly adjust the heat output to maintain it. Tip over cut-out Should your heater accidentally be knocked over, the instant tip over cut will automatically interrupt power to the heating element and fan. The heater will not resume operation until it is replaced in the upright position. Electronic thermostat The electronic thermostat constantly monitors the room’s temperature and adjusts the heat output to maintain your selected temperature. Power light Illuminates to indicate that the heater is connected to the power outlet and is switched on. Temp limit light Illuminates to indicate that the room has reached the selected temperature. Removable dust filter The filter collects dirt and dust from the air circulating through the heater. It is removable for easy cleaning. Ceramic disc heating Each ceramic disc contains 1200 honeycomb shaped holes that heat all of the air that passes through them, generating up to 40% more warmth than conventional coil or ceramic chip heaters. Using your heater MF2000 Micro Furnace Ceramic Disc Heater 1. Place the heater on a flat level surface, approximately 1 metre from any wall or other objects such as furniture, curtains, plants or combustible material, and ensure that the air intake and outlet are clear of obstructions. Note: For most efficient heating, place the heater on the floor where the air is cooler, near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room. 2. Insert the plug into a 230-240V power outlet and turn the power on. The red power light will illuminate and the screen will display the ambient room temperature. 3. Press the Standby button to select the desired operating mode. Press it once to select the AUTO mode, or twice to select MANUAL mode. 4. In AUTO mode, use the + and – buttons to select the desired temperature. The selected temperature (in degrees celsius) will flash several times to indicate that it is set. The screen will then return to displaying the current room temperature. The thermostat will continue to vary the heat output to maintain your selected temperature. 5. In MANUAL mode, use the + and – buttons to select the desired heat setting, from H1 to H5. The selected setting will flash several times to indicate that it is set. The screen will then return to displaying the room temperature. The heater will operate constantly at the selected heat level, without monitoring the room temperature. 6. To switch between operating modes or turn the heater off, press the standby button. 7. Switch the power off at the power outlet and unplug the heater when not in use. Using your heater (continued) MF1500 Micro Furnace Ceramic Disc Heater 1. Place the heater on a flat level surface, approximately 1 metre from any wall or other objects such as furniture, curtains, plants or combustible material, and ensure that the air intake and outlet are clear of obstructions. Note: For most efficient heating, place the heater on the floor where the air is cooler, near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room. 2. Insert the plug into a 230-240V power outlet and turn the power on. The power light will illuminate. 3. To operate the heater, select HEAT on the mode dial. Rot...

Herunterladen

Geben Sie zwei Ziffern: