Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Williams, modell 0743511

Hersteller: Williams
Dateigröße: 942.09 kb
Dateiname: 07435_Installation.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

• Do not try to light any appliance. • Do not touch any electrical switch. • Do not use any phone in your building. • Extinguish any open flame. • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. - Installation and service must be performed by a qualified installer, service agency or the gas supplier. WARNING: If the information in this manual is not followed exactly; a fire or explosion may result, causing property damage, personal injury or loss of life. Williams Furnace Co., 250 West Laurel Street, Colton, CA 92324 U.S.A. MODEL: Natural Gas Only 0743512 MODEL: Propane Gas Only 0743511 WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency or the gas supplier. WARNING: Installation and repair must be done by a qualified service person. The furnace should be inspected before use and at least annually by a professional service person. WARNING: If not installed, operated and maintained in accordance with the manufacturer’s instructions, this product could expose you to substances in fuel or from fuel combustion which can cause death or serious illness and which are known to cause cancer, birth defects or other reproductive harm. Installation Instructions and Owner’s Manual Direct-Vent Wall Furnace Table of Contents General Information and Technical Data Instructions to Installer ………………………………………………………………………….……….................………… 1 Safety and General Warnings ………………………………………………………………….…………………...………... 2Technical Data ……………………………………………………………………………………….…………...……………. 3 Installation Wall Installation ………………………………………………………………………………………………………………… 4Outside Location for Vent Terminal ……………………………………………………………………………….…………. 5 Gas Supply ………………………………………………………………………………………………………….………….. 7Operating Instructions Operating Instructions …………………………………………………………………………………………….………….. 9Servicing Checking and Adjusting the Gas Manifold Pressure ………………………………………………………………….…. 10 Checking, Removing and Reassembling of the Vent – Air Intake System ………………………………………….…. 10 Lubrication of Moving Parts ……………………………………………………………………………………………….… 10 Flame Visual Check ……………………………………………………………………………………………………….…. 10Replacement Parts ………………………………………………………………………………………………………….… 11 General Information and Technical Data This furnace is design certified to ANSI Z21.86-2004 / CSA 2.32-2004 Gas–Fired Gravity and Fan-Type, Direct-Vent Wall Furnaces as a Fan-Type Direct-Vent Wall Furnace to be installed on an outside wall according to these instructions. Any alteration of the original design, installed other than as shown in these instructions or used with a type of gas not shown on the rating plate is not permitted. Instructions to Installer Installation and repair should be done by a QUALIFIED SERVICE TECHNICIAN. The installation must conform to local codes or in the absence of local codes; the installation must conform to the National Fuel Gas Code ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code CSA B149.1. Mobile (Manufactured) home installations must conform with the “Manufactured Home Construction and Safety Standard Title 24 CFR, Part 3280” or, when such a standard is not applicable, the Standard for Manufactured Home Installations, ANSI A 225.1 NFPA/501A, Mobile Home Standard, CAN/CSA Z240 MH Series, in Canada. Installer must leave instruction manual with home owner after installation. Installer must show home owner how to start and operate furnace and thermostat. Installer must provide a 1/8-inch NPT plugged tapping for test gauge connection immediately upstream of the gas supply connection of the furnace. During initial firing of the furnace, residual manufacturing grease will bake out and smoke will occur which is not a health danger. To prevent nuisance and operation of fire alarms, ventilate the room for the first two hours of operation. WARNING: Any change to this furnace or its controls can be dangerous. This is a heating appliance and any panel, door or guard removed for servicing this furnace must be replaced prior to operating the furnace. 1 Safety Rules and General Warnings DO NOT OPERATE THIS FURNACE WITHOUT FRONT PANEL INSTALLED • Due to high temperatures, the furnace should be located out of traffic and away from furniture and draperies. • Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. • Young children should be carefully supervised when they are in the same room as the furnace. • Clothing or other flammable material should not be placed on or near the furnace. • Any safety screen or guard removed for servicing an furnace must be replaced prior to operating the furnace. • Keep burner and control compartment clean. • The outside vent cap is hot whil...