Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Metra Electronics Dateigröße: 1.03 mb Dateiname: Unterrichtssprache:

Reach under the driver's side dash and unclip the temperature control cable. Using Metra's 86-5618, pull the factory radio/climate control panel from the dash. Disconnect the switch power harness, antenna plug, radio/speaker power harnesses and vacuum hose harness. 2 CONTROL PANEL) Turn the integrated control panel over and disconnect the vent control harness ("A"), fan speed control harness ("B"), and defroster harness ("C"). Unclip the main switch harness from the side of the factory unit. (This harness connects the fan speed control harness, vent control harness and defroster harness). 1 Turn the factory climate control dials into a vertical position and pull the dials off. (see Fig. A). Unclip the vent control switch and remove. Remove (2) torx-head screws securing the temperature control switch and fan speed control switch and remove, (see Fig. B). Mount the switches to the back of the Integrated Mounting Kit with the same torx-head screws. (seeFig. C). Holding the climate control dials in a vertical position, insert the dials onto the posts of the mounted switches and secure. (seeFig.D) Cut and remove the shaded portion of the sub-dash lip. (seeFig.A) Make all wiring connections to the Integrated Mounting Kit and snap the assembly into the sub-dash. Reach under the driver's side dash and re-attach the temperature control cable. 2...

Herunterladen

Geben Sie zwei Ziffern: