Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Philips, modell SCD501/10

Hersteller: Philips
Dateigröße: 852.89 kb
Dateiname:

Unterrichtssprache:enesfrpt

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten


Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


Why does the parent unit beep?
Why is the connection lost or are there sound
• If the parent unit beeps while the ‘link’ light
interruptions every now and then?
flashes red continuously, the connection with
• The baby unit and the parent unit are probably
the baby unit is lost. Move the parent unit closer
close to the outer limits of the operating
ENGLISH
to the baby unit or turn on the baby unit if it
range. Try a different location or decrease the
was off. The baby unit may be turned off. Turn
distance between the units. Please note that
on the baby unit.
it takes about 30 seconds each time before a
connection between the units is established.
Why does the appliance produce a high-pitched
• You may have placed the unit next to a
noise?
transmitter or other DECT appliance, such as
• The units may be too close to each other.
a DECT telephone or other 1.8GHz/1.9GHz
Make sure the parent unit and the baby unit are
baby monitor. Move the unit away from the
at least 1 meter/3.5 feet away from each other.
other appliances until the connection is re-
established.
Why don’t I hear a sound/Why can’t I hear
my baby cry?
Is my baby monitor secure from eavesdropping
• The baby unit and the parent unit may be out
and interference?
of range of each other. Reduce the distance
• The DECT technology of this baby monitor
between the units.
guarantees no interference from other
• You may have set the volume to the lowest
equipment and no eavesdropping.
level (mute). Increase the volume.
Why do the batteries of the parent unit run low
Why does the parent unit react too quickly to
so fast when I use the unit on batteries?
other sounds?
• The operating time on batteries may be up
• The baby unit also picks up other sounds than
to 24 hours, but this depends on the type of
those of your baby. Move the baby unit closer
batteries and how often and how long you use
to the baby (but observe the minimum distance
the parent unit on batteries. Please note that
of 1 meter/3.5 feet).
the batteries are not charged when the parent
unit is connected to an electrical outlet.
The specified operating range of the baby
Plug in the parent unit when an electrical outlet
monitor is 300 meters/985 feet. Why does my
is available close by to save battery power.
baby monitor manage a much smaller distance
• Make sure you use 1.5V R6 AA alkaline
than that?
non-rechargeable batteries or charged
• The specified range is only valid outdoors in
1.2V R6 AA rechargeable batteries.
open air. Inside your house, the operating range
Recharge the rechargeable batteries in a
is limited by the number and type of walls and/
separate battery charger.
or ceilings in between. Inside the house, the
operating range is up to 50 meters/150 feet.
Can I use the baby unit on batteries?
• No, you cannot use the baby unit on batteries.
The baby unit can only be used on electrical
power.
11


...

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien