Stimmen - 5, Durchschnittliche Bewertung: 3.4 ( )

Hersteller: Braun Dateigröße: 1.06 mb Dateiname: Unterrichtssprache:

Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock. Description 1 Shaver foil 2 Cutter block 3 Release button 4 On/off switch («start/stop») 5 Long hair trimmer 6 Charging lights (green) 7 Low-charge light (red) (5877/5875 models only) 8 Replacement light for shaving parts 9 Reset button 10 Special cord set 11 Model 5877 only: charging stand Charging The best environmental temperature for charging is between 15°C and 35°C. • Using the special cord set, connect the shaver/charging stand to an electrical outlet with the motor switched off. • When charging for the first time, leave the shaver to charge continuously for 4 hours. • Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour. • A full charge provides up to 50 minutes of cordless shaving time depending on your beard growth. • Maximum battery capacity will only be reached after several charging/discharging cycles. • If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set. 6 Charging lights 5873/5874 and 5875 models: The green charging light blinks when the shaver is being charged. When the battery is fully charged, the charging light lights permanently. 5877 model: The 3 segments of the green charging light indicate the charging level by thirds. When fully charged, all 3 segments of the charging light shine permanently. Low-charge light (5877/5875 models only) The red low-charge light flashes when the battery capacity has dropped below 20%, provided the shaver is switched on. The remaining capacity will then be sufficient for 2 to 3 shaves. Shaving Turn on the shaver («start»): The pivoting cutting system automatically adjusts to every contour of your face. Trimmer: When the long hair trimmer is activated, it allows the controlled trimming of moustache or sideburns. Cleaning This appliance is suitable for cleaning under an open water tap. /f" Warning: Detach the hand-held part from the power supply before cleaning it in water. Regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean: • Switch the shaver on (cordless) and rinse the shaving head under hot running water. A natural based soap may also be used provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. • Next, switch off the shaver, remove the shaver foil and the cutter block. Then leave the disassembled shaving parts to dry. • If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil. Alternatively, you may clean the shaver using the brush provided: • Switch off the shaver. Remove the shaver foil. • Using the brush, clean the cutte...

Herunterladen

Geben Sie zwei Ziffern: