Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Do not use attachments not recommended by the manufacturer. 3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair. 4. Keep the cord away from heated surfaces. 5. Never drop or insert any object into any opening. 6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 7. Do not use this appliance with damaged shaving blades and/or foil, as facial injury may occur. 8. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to “off” then remove plug from outlet. SAVE THESE INSTRUCTIONS SPECIFICATIONS Power source: 100- 40 V AC, 50-60 Hz (Automatic voltage conversion) Motor voltage: 3.6 V DC Charging time: 1 hour This product is intended for household use only. Important . Before use This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving.You can use this watertight shaver in the shower and clean it in water. The following is the symbol of Wet shaver. The symbol means that the hand-held part may be used in a bath or shower. Treat yourself to wet lather shaves for at least three weeks and notice the difference.Your Panasonic Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method. . Using the shaver Caution - The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil etc. is damaged as you will cut your skin. . Charging the shaver Do not use any power cord or AC adaptor other than one specifically designed for this model. Plug in the adaptor into a household outlet where there is no moisture and handle it with dry hands. The shaver may become warm during use and charging. However, this is not a malfunction. Do not charge the shaver where it will be exposed to direct sunlight or other heat sources. Hold the adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it. The supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped. Adequate ambient temperature for charging is 15-35 °C (5995 °F). If the indicators on the LCD panel do not glow, wait for a short while until it glows. The adaptor is intended to be correctly oriented in a vertical or floor mount position. . Cleaning the shaver Warning - Disconnect the power cord from the shaver before cleaning it to prevent electric shock. Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. Wipe it with a cloth dampened with soapy water. Do not use thinner, benzine or alcohol. . Storing the shaver Disconnect the power cord when storing the shaver. Do not bend the power cord or wrap it around the shaver. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Keep these operating instructions in a safe place. English English Parts identification . . . . . . . . . . . . . . . . . . A Protective cap 6 Pivot action selector B Outer foil section 7 OFF/ON switch 1 Foil frame 8 LCD panel 2 System outer foil 9 Appliance socket 3 System outer foil release : Trimmer buttons ; Trimmer handle C Inner blades E Adaptor (RE7-40) D Main body . Power cord 4 Foil frame release buttons . Appliance plug 5 Finger rest ChargingCharge 1 11 Insert the appliance plug into the shaver. 2 22 Plug in the adaptor into a household outlet. • The indicators on the LCD panel glow and charging starts. • Charging is completed when the indicators on the LCD panel blink. (Max. 1 hour later) • If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration. Reading the LCD panel The LCD panel shows the remaining battery capacity from 0% to 100%, in 10% increments. 10 minutes after After charging is While charging charging is completed completed The indicators The indicators blink The indicators blink once every once every glow. second. seconds. When the battery capacity is low You can shave 1 to times after “10%” appears. (This will differ depending on usage.) • “10%” appears and blinks. • A full charge will supply enough power for approx. 14 shaves of 3 minutes each. .Using the trimmer Slide the trimmer handle up. Place at a right angle to your skin and move downwards to trim your sideburns. EnglishUsingtheshaverShav...