Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Dispose of properly when empty. Description 1 Foil & Cutter cassette 2 Long hair trimmer 3 Precision setting switch (« ») (360s only) 4 On/off switch 5 Charging lights (green) 6 Low-charge light (red) 7 Replacement light for shaving parts 8 Shaver power socket 9 Special cord set 10 Charging stand (330s only) 11 Etui (360s only) 12 Protection cap (330s/320s only) Charging The best environmental temperature for charging is between 15 °C to 35 °C. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time. • Using the special cord set (9), connect the shaver or the charging stand (10) to an electrical outlet with the motor switched off. When charging for the first time or when the shaver is not used for a few months, leave the shaver to charge continuously for 4 hours. • Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour. • A full charge provides up to 45 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles. • If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set. • 5-minute quick charge is sufficient for a shave. Charging lights (5) The green charging lights show the charge status of the batteries (330s/320s: 1 charging light). The green charging light blinks when the shaver is being charged or switched on. When the battery is fully charged, all green charging lights (330s/320s: 1 charging light) shine permanently, provided the shaver is connected to an electrical outlet. Low-charge light (6) The red low-charge light flashes when the battery is running low. You should be able to finish your shave. Shaving Press the on/off switch (4) to operate the shaver (picture). The flexible shaving foils automatically adjust to every contour of your face (picture). Long hair trimmer (2) To trim sideburns, moustache or beard, slide the long hair trimmer upwards. Precision setting switch (« ») (360s only) For precise handling in hard to shave areas (e.g. under the nose) slide the switch (3) to the right to position « ». The centre trimmer and one foil will be lowered. Tips for the perfect shave For best results, Braun recommends you follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90°) to your skin. 3. Stretch your skin and shave against the direction of your beard growth. Cleaning The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. Regular cleaning ensures better shaving performance. Rinsing the shaver head under running water after each shave is an easy and fast way to keep it clean: • Switch the shaver on (cordless) and rinse the shaver head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. • Next, switch of...
Dieses Handbuch ist für folgende Modelle:Rasierer - 320S-4 (5.06 mb)