Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
10. Do not use the appliance with a damaged or broken comb or with teeth missing from the blades, as injury may result. Before each use, make certain the blades are aligned properly and oiled. 11. Do not use the appliance outdoors or where aerosol (spray) products are being used or oxygen is being administered. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY OPERATING INSTRUCTIONS: 1. Remove the battery compartment cover by pushing in and down toward the bottom of the trimmer. 2. Align the AA batteries with the positive and negative positions indicated inside the battery compartment. Being careful not to bend the clips, insert the negative end of each battery first so it will slip easily into position. 3. Return the battery cover to its original position by pushing it in and up until you hear a small click as it locks into place. 4. To use your trimmer, push ON/OFF switch upwards to ON position. 5. After you finish using your trimmer, push down on the ON/OFF switch to turn the trimmer off. 6. For your convenience, the trimmer comes with a storage base to hold the trimmer and accessories. USER MAINTENANCE INSTRUCTIONS TAKING CARE OF YOUR TRIMMER OILING THE BLADES About once a month you should oil the trimmer blades with the oil provided in your kit. It is best to do this over a piece of newspaper. Turn the trimmer on and hold it so that the blades are pointed downward. Spread one drop of oil across the blades, then turn the trimmer off and wipe away the excess oil with a soft cloth. Be careful not to use too much oil and don’t oil your trimmer more than necessary, as this could damage the motor. (Never attempt to oil the motor bearing, as it is permanently lubricated.) After oiling the blades, return the trimmer and oil packet to the trimmer storage base. KEEP OIL OUT OF REACH OF CHILDREN. ON/OFF SWITCH To operate, simply push slide toward blade; to stop, push slide away from blade. *Requires 2 AA batteries (not included). We recommend using alkaline batteries in your trimmer because they last longer. BLADE CARE Because the trimmer blades are precisionmade for a very special use, they should always be handled with care. Each time you finish using the trimmer, take the cleaning brush provided and brush away any loose hair that has collected in the blades. Then store the trimmer in its storage base to protect the blades until the next use. Be especially careful when changing or adjusting blades. When you have your trimmer serviced, be sure that both blades are sharpened or replaced at the same time. To promote the long life of the appliance, use your trimmer only for the purpose intended by the manufacturer – to trim your beard and mustache. REMOVING BLADE SET This trimmer comes with a detachable blade set; which makes maintenance and replacement easy. To remove the blade set: • Make sure the trimmer is in the OFF position • With the power switch facing you, press the blade on the teeth and in direction away from you until they pop out of the housing To replace the blade set: • Make sure the taper control is set to the longest #1position. • Looking at the trimmer from above you will see a notch at the back of the trimmer. • There is a tab on the blade set on the bottom, opposite the blades Position that tab so that it fits into the notch inside the trimmer head Push the blade set down onto the trimmer head until it snaps into place. THREE POSITION TAPER CONTROL The Conair trimmer taper control switch is positioned at the back of the unit. You can hold the trimmer in your hand and adjust the switch as needed. The taper control eliminates the need in some situations for an attachment comb because it lets you gradually adjust the closeness of the cut. For closest cut and shortest hair, push switch all the way to level #3. To increase the cutting length, slowly push control down to level #2 or #1 for longer cut. Note that too much clipped hair on the clipper can slow down its operation. To remove it without removing the blades simply use the enclosed cleaning brush and gently sweep away the clipped hair from cutting surfaces. The taper control has no function when using the nose and ear attachment. GROWING A BEARD AND MUSTACHE There are three key factors that will determine which beard or mustache style is best for you: 1. The shape and dimensions of your face. 2. The natural growth of your beard/mustache. 3. The thickness of your beard/mustache. If you are unsure about the type of beard or mustache that would most suit your face, speak with a professional hair stylist and ask for an opinion on what style would be best. Once your beard or mustache has been styled, it is essential that you maintain its appearance. To do this, use your trimmer to trim your beard/mustache weekly. For the best trimming results, your beard should be slightly damp (NOT WET) when using your trimmer. This will prevent the trimmer from removing more hair than desired. TYPES OF BEARDS/MUSTACHES GETTING STARTED: OUTLINING YOUR BEARD 1. It is ...