Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Bodyline Products International Dateigröße: 1.88 mb Dateiname: Unterrichtssprache:

Unplug the unit immediately. DO NOT USE your shaver while bathing or showering. ALWAYS UNPLUG your shaver after use or prior to cleaning the unit, except when charging the unit. Axis Orbit 4000 and Orbit 2000 |4| english DO NOT PLACE OR STORE the shaver in water or any other liquid or where it may accidentally fall or be pulled into water. WARNING To avoid burns, fire, electric shock or other injury… 1. Except when recharging your shaver, never leave the unit unattended when plugged in. 2. Always provide close adult supervision when using your shaver near children or the disabled. 3. Follow all instructions in this manual carefully. Do not use attachments with your shaver that have not been specifically recommended by Bodyline Products International Inc. 4. Do not use a unit that is not operating normally, has been immersed in water or other liquid, or has a damaged cord or plug. Axis Orbit 4000 and Orbit 2000 | | english Call 1-877-263-9500 to arrange for service. 5. Never operate your shaver outdoors. Avoid use in the vicinity of aerosol products or where oxygen is being administered. Also, keep the cord away from heated surfaces. 6. When plugging in your shaver, first attach the cord to the unit and then plug the cord into an electric outlet. When disconnecting, be sure to switch the unit off, unplug the cord from the electric outlet and then detach the cord from the shaver. 7. Do not insert foreign objects into any of the openings in the unit. 8. Never store the unit with the cord attached. 9. Store your shaver and power cord in a dry place. 10. Avoid exposing the unit to direct sunlight or ambient temperatures above 140°F (60°C). 11. To avoid injury to the face, do not use the unit if the cutters or Axis Orbit 4000 and Orbit 2000 | | english head assembly have been damaged. 12. Never wrap the power cord around the unit. Damage to the power cord may result. 13. This shaver is intended and designed for use on human facial hair only. 14. Never unplug or plug-in the shaver when your hands are moist or wet. 15. For home use only. WASHABLE SHAVER A shaving appliance the hand-held part of which may be cleaned under water 16. Use only in dry condition 17. Do not submerge shaver into water. Axis Orbit 4000 and Orbit 2000 | | english 18. The hand-held unit shall be detached from the power supply cord before cleaning. 19. The shaver shall not be used until it has dried. SAVE THESE INSTRUCTIONS PRECAUTIONS ON USING THE SHAVER > Do not keep the shaver in a humid place, a place where the shaver is exposed to splashes of water, or in high temperatures. > To clean the body case of the shaver, wipe it with a cloth soaked with a diluted water solution of a neutral detergent. Do not use thinner or benzene as it will damage the plastic portions of the body. > Do not recharge the shaver or use it with an AC power supply when the room temperature is below 0° C or over 40° C. Also, never recharge it under direct sunlight or near a heating element such as heater or incandescent light. Axis Orbit 4000 and Orbit 2000 | | english > Do not recharge the shaver or use it with an AC power supply in a humid place or a place where the shaver is exposed to splashes of water. > Do not leave the shaver unattended while it is recharged. > If pre-shave lotion or shaver oil sticks to the body case of the shaver, wipe it off completely. Otherwise, the plastic portions of the shaver may be damaged. > Before shaving, wipe off oiliness of your face. Otherwise, the shavings will stick to the outer foil as the inner blade rubs against it. If you find the outer foil soiled, wipe it clean with tissue paper or the like before using the shaver. > Excessive application of shaver oil will also soil the outer foil. In that case, wipe the foil clean with tissue paper or the like before using the shaver. When cleaning the shaver, take care not to apply an excess amount of shaver oil on the inner blade and outer foil. Axis Orbit 4000 and Orbit 2000 | | english Axis Orbit 4000 and Orbit 2000 |10| english Axis Orbit 4000 and Orbit 2000 |11| english shaver head assembly 3 floating heads 3 inner cutters on/off switch switch lock button indicator lights shaver head assembly 3 floating heads 3 inner cutters on/off switch switch lock button indicator lights (red/green) shaver head assembly 3 floating heads 3 inner cutters on/off switch switch lock button indicator lights (red/green) PARTS OF YOUR SHAVER headguard cleaning brush power cord trimmer shaver head assembly 3 floating heads 3 inner cutters on/off switch switch lock button indicator lights (red/green) shaver head assembly 3 floating heads 3 inner cutters switch lock button on/off switch indicator lights (red/green Your shaver is designed and manufactured to exacting standards in order to provide you with years of close, comfortable shaves. Feeling for your shaver It normally takes about three weeks for your skin to adjust to a new electric shaver. As you use your shaver, you will develop a shaving style ...

Herunterladen

Geben Sie zwei Ziffern: