Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Bends or offsets in the flue restrict gas velocity and must be allowed for when designing the flue height and diameter which will be dependent on the building and local conditions. A flue connection is required and is not included in the contract. Exhaust flue - 200mm in diam (canopy models), 100mm (non canopy models) Clearance: 50mm clearance is required at back and sides of unit 2695mm clearance required back to front of oven with door open Minimum 2900mm ceiling height Floor: A concrete or tile surface is preferred. The floor area is to be flat to within 3mm over whole floor area. Access: Oven is supplied partially assembled to be fully erected on site. Largest piece if unassembled 2140mm H x 1680mm W x 750mm D In line with policy to continually develop and improve its products, Moffat reserves the right to change specifications and design without notice. Australia New Zealand Moffat Pty Limited Moffat Limited Free GiU 1800 023 953 Free Call 0800 663 328 email: vsales@moffat.com.au email: sales@moffat.co.nz n wwwmoffatco nz WW VV .iuuilcu..l„u.nz. DEL300CX 0403V1 TECHNICAL SPECIFICATIONS In line with policy to continually develop and improve its products, Moffat reserves the right to change specifications and design without notice. Australia Moffat Pty Limited Free Call 1800 023 953 email: vsales@moffat.com.au New Zealand Moffat Limited Free Call 0800 663 328 email: sales@moffat.co.nz DEL300CX 0403V1...