Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Beko Dateigröße: 224.5 kb Dateiname: Unterrichtssprache:

Tape the oven door to the side walls. * If you do not have the original carton; Take the necessary precautions in order to prevent the exterior panels, and the glass surfaces of the oven from being damaged. Pack the oven in bubble wrap or thick cardboard and tape it securely in order to prevent damage during transportation. The oven must be transported upright. Do not place other items on the top of the cooker. 16 FI Maintenance and cleaning Turn off the mains switch before cleaning * Before switching on again ensure that all controls are in the OFF position. * Make sure that the oven, grill and burners are sufficiently cool before you start cleaning. * Your product is manufactured in a manner that it should not overflow the oily food juices under the counter. The pan supports can easily be removed and the top burner plate can be cleaned with soapy water, and rinsed with a dry cloth. * Wash and rinse the gas burner caps and the pan supports with soapy water. Never wash the gas burner caps and the pan supports in the dishwasher. For the dirts and stains on the burner heads that can not be cleaned, use the metal surface cleaners you can obtain from the market according to their instructions. * It is recommended that the acidic matters such as oil, lemon etc. should be cleaned immediately. * Use a damp cloth to clean the interior and exterior. Never use any sharp instruments, abrasive household cleaner, or detergents for cleaning. For hard stains use suitable washing liquid. * Ensure that the door seal is dry after cleaning. We recommend that grill elements be wiped with a damp cloth to remove any fat splashes. This will prevent fumes for any fat being burned off when the cooker is next used. Vitreous enamel hob surround Clean with a cloth wrung out in soapy water. Stubborn stains can be removed with a cream, paste or liquid cleaner. Check that the cleaning agent used is approved by the Vitreous Enamel Development Council. * Never clean the cooker surface by using materials such as hurd brushes, steel pads or knives, which can easily scratch the enamelled and stainless steel surfaces. * Special cleaners that are commercially avaible may be used after carefully reading the warning labels written on them. Do not use cleaning agents containing acid or chlorine. Cleaning can be accomplished using a soft piece of cloth wetted with soapy water or with commercially available special surface cleaners and a soft piece of cloth. Especially use liquid paste or cream type cleaners. Control panel Wipe over the control panel with a damp cloth and polish with a dry cloth. Do not use oven cleaners or aerosols, scouring pads or abrasive powder for cleaning the plastic knobs as damage will occur. Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard. Oven interior Before switching on again ensure that all controls are in the OFF position. Take out all trays and the grill out of the oven. Clean out the interior with a piece of moist, soapy cloth. Then, clean it once more with a wet piece of cloth and let it to dry. Do not use dry powder agents for cleaning. Special cleaners that are commercially available may be used after carefully reading the warning that are written on the labels. * Catalytic-enamelled models; The oven interior of this model is coated with catalytic enamel since the catalytic enamel cleans itsellf, you do not have to perform an extra cleaning after the cooking operation. If your oven obtains steel rack; To clean the steel rack, unscrew the 4 screws. After cleaning operation, assemble the steel rack to the oven body again. Warning! Never clean the inside of the oven and trays with hard brushes, steel pads or knives. Do not use cleaning agents containing acid or chlorine on stainless steel surfaces and the handle. Cleaning can be accomplished using a soft piece of cloth wetted with soapy water or with commercially available special surface cleaners and a soft piece of cloth. 18 Do not use these materials for cleaning Hard abrasive sponges Replacing the oven lamp (In models with lamp): 1. Unplug the power cable. 2. Then, remove theprotective glass cover of the lamp inside your oven by turning it counterclockwise. 3. Then, remove the bulb by turning it counterclockwise. 4. After installing the correct bulb obtained from an Authorized Service, reinstall the protective glass of the lamp. Installation of gas *Before your appliance is connected to the gas supply, check the ensure that the gas category and pressure specifications shown in the data plate corresponds with your gas supply. If necessary call authorized service for adjusting to gas category. *This appliance shall be installed in accordance with the regulations in force and only used in a well ventilated space. Read the instructions before installing or using this appliances. In the interest of safety this appliances must be installed and/or serviced by a...

Herunterladen

Geben Sie zwei Ziffern: