Stimmen - 4, Durchschnittliche Bewertung: 4.8 ( )

Hersteller: Fagor America Dateigröße: 2.29 mb Dateiname: Unterrichtssprache:

Re-inserting the grilles after cleaning: Replace the grilles on the side walls by following the steps indicated above but in reverse order. REPLACING THE BULB OF THE INTERIOR LIGHT 4.2. You can replace the bulb for the oven’s interior light if it stops working.You can obtain heat-resistant 25W replacement bulbs capable of withstanding 6000F from the Official Technical Service or from a specialized electrical store. To replace the bulb do the following: 1. Disconnect the oven from the power mains. If necessary, let the oven cool down. 2. Unscrew the cover over the lamp by turning it to the left. 3. Replace the bulb with one of the same type. 4. Replace the glass cover on the lamp following the procedure described. 5. Re-connect the oven to the power mains. 29 5. TROUBLESHOOTING There may be small anomalies that do not necessarily mean the existence of a product failure and so do not require a Technical Service call. These small anomalies are often easy to correct. In order to avoid an unnecessary call of a Service Engineer, check to see if the failure you have encountered is included in the table below: 30 YOU NOTICE THAT... POSSIBLE REASONS WHAT TO DO The oven is NOT working. The luminous symbols are not lit. •No power supply. •The oven is not connected. •Check the status of the electrical installation. •Connect the oven. The oven is NOT working. •The timer control is in position “0” or •Turn the selector manually or set the desired cooking time. The oven is making a series of beeps. •Several reasons. •Read the timer’s user manual carefully. The oven is NOT working. symbol is flashing. •Several hours have passed with the oven operating, without any timer button being pressed. •Interruption of the power supply, with the function selector not in position “0”. •Oven installed with the function selector not in position “0”. •Turn the function selector to the “0” position. •Turn the function selector to the “0” position and set the clock to the right time. The oven is NOT working. symbol is flashing. Oven just installed, or interruption in the power supply, with the function selector not in position “0”. Set the clock to the right time and the oven will start. The oven is NOT working. symbol is flashing. The time pre-set for cooking has elapsed. Turn the function selector and The temperature selector to the “0” position. The oven is NOT working. symbol is lit. Oven blocked with the function selector in position “0”. Release the timer as indicated in the “Child Safety Lock” part of the timer’s user manual. The oven IS working, but the symbol is flashing. The time set for the oven alarm has elapsed. Press any button. The oven light is NOT working. •The lamp is not operational. •The oven is not connected or your electrical system has a fault and the fuse has tripped. •Change the bulb. •Connect the oven or check if the fuse has tripped. Smoke comes out when in use. •Oven temperature is too high. •Greasy oven. •Reduce the oven temperature. •Clean the oven. The oven makes a noise after cooking is completed. The oven fan is operating (even with the oven off), to cool down the temperature in the surroundings. This is absolutely normal. The interior glass of the oven door is misted up and dripping. An accessory (grille, tray) is in contact with the glass. Push the accessory further in to prevent it coming into contact with the glass. 31 6. ENERGY-SAVING TIPS • Pre-heat the oven only where this is indicated in the recipe or in the cooking table for the dish you want to make. • It is better to use dark baking molds, preferably enamelled in black, as these materials absorb heat particularly well. • If you wish to bake a batch of several cakes, you should do so one after the other. As the oven is already hot, the baking times of second and subsequent cakes are shorter. You can also prepare two cakes simultaneously by placing rectangular molds side by side. • If using the oven continuously for a long time, you can switch it off 5 or 10 minutes before the time indicated and take advantage of the residual heat to finish preparing the food. • If your oven includes the “Gentle Grill” function, use it to prepare small amounts of grilled food, placing the food in the central part of the tray or grille. 32 7. STOP/START DIGITAL TIMER 1. Timer function selector button 2. “+”button }Time adjustment buttons 3. “-“ button 4. Automatic disconnection indicator symbol 5. Cooking duration indicator symbol 6. Stop Cooking time indicator symbol 7. Beeper indicator symbol 8. Time adjustment indicator symbol 9. Screen 10. NET Compatible oven indicator symbol 11. Child safety lock indicator symbol Note:military time 33 7.1 CLOCK When the oven is connected to the mains electricity or following an interruption in the power supply, the symbol will flash, providing that the function selector is in the “0” position; if not, turn the selector to “0” and follow the procedure described below to set the time. WRONG RIGHT To set the time: 1. Press the but...

Herunterladen

Geben Sie zwei Ziffern: