Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Blodgett Dateigröße: 2.47 mb Dateiname: Unterrichtssprache:

doesn’t appear in the display, start again at Step 4. To adjust the oven temperature, touch the BAKE pad, enter the new temperature using the number pads, and touch the START pad. NOTE: The CLEAR/OFF and COOK TIME pads are active during the Sabbath feature. Sabbath Make sure the clock shows the correct time of day and the oven is OFF. Feature: 1 Press and hold both the BAKE and BROIL How to set for HIGH/LOW pads, at the same time, untiltimed baking the display shows “SF.” or roasting – NOTE: If bake or broil appears in the display, immediate start the BAKE and BROIL HIGH/LOW pads were not touched at the same time. Touch the and automatic CLEAR/OFF pad and begin again. stop 2 Tap the DELAY START pad until “SAb bAtH” appears in the display. 3 Touch the START pad and . will appear in the display. When the display shows . the oven is 4 Touch the COOK TIME pad. set in Sabbath. When the display shows . the oven is baking/roasting. 5 Touch the number pads to set the desired length of cooking time between 1 minute and 9 hours and 99 minutes. The cooking . time that you entered will be displayed. 6 Touch the START pad. 7 Touch the BAKE pad. No signal will be given. 8 Using the number pads, enter the desired temperature. No signal or temperature will be given. 9 Touch the START pad. 10 After a random delay period of approximately 30 seconds to 1 minute, the oven is baking/roasting. If . . . will appear in the display indicating that doesn’t . appear in the display, start again at Step 7. To adjust the oven temperature, touch the BAKE pad, enter the new temperature using the number pads, and touch the START pad. When cooking is finished, the display will change from . to . and “0:00” will appear, . indicating that the oven has turned OFF but is still set in Sabbath. Remove the cooked food. Using the Sabbath Feature Wall Oven How to exit 1 Touch the CLEAR/OFF pad. the Sabbath 2 If the oven is cooking, wait for a random feature delay period of approximately 30 seconds to 1 minute, until only . is in the display. 3 Press and hold both the BAKE and BROIL HIGH/LOW pads, at the same time, until the display shows “SF.” 4 Tap the DELAY START pad until “12 shdn” or “no shdn” appears in the display. “12 shdn” indicates that the oven will automatically turn off after 12 hours. “no shdn” indicates that the oven will not automatically turn off. 5 Touch the START pad. NOTE: If a power outage occurred while the oven was in Sabbath, the oven will automatically turn off and stay off even when the power returns. The oven control must be reset. Care and Cleaning Wall Oven BE SURE ELECTRICAL POWER IS OFF AND ALL SURFACES ARE COOL BEFORE CLEANING ANY PART OF THE OVEN. How to remove protective shipping film and packaging tape Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time. To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak. NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on. Oven racks All oven racks may be cleaned by hand with an abrasive cleaner or steel wool. After cleaning, rinse the racks with clean water and dry with a clean cloth. Gray porcelain-coated oven racks (including the offset rack) may remain in the Oven rack oven during the self-cleaning cycle without being damaged. The nickel-plated oven racks (including the offset rack) may remain in the oven during the self-cleaning cycle, but they will lose their luster and become hard to slide. It Offset rack (27. models only) will be necessary to grease all oven rack side edges with a light coating of vegetable oil after cleaning them by hand or in the oven. This will help maintain the ease of sliding the racks in and out of the oven. Stainless steel (If Included) & metal parts Do not use a steel-wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface. To inquire about purchasing stainless steel applicance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number: National Parts Center 800.626.2002 ge.com Broiler pan and grid After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad. If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dish cloth. Soaking the pan will remove burned-on foods...

Herunterladen

Geben Sie zwei Ziffern: