Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Lincoln Dateigröße: 434.04 kb Dateiname: mccoe_a.pdf Unterrichtssprache:

2. Press the Up or Down key until the value you want appears on the display. 3. Press the Cook Temp key again. The cooking temperature has been set. [`idle] will appear on the display. Set the cooking time: 1. Press the Cook Time key. [tinE1] and then the cooking time value will appear on the display. 2. Press the Up or Down key until the value you want appears on the display. 3. Press the Cook Time key again. The Cooking Time has been set. [`idle] will appear on the display. 26 n Watlow MINICHEF 2000 Application 9 Set the Fan 1. Press the Fan Settings key. [`FAn1] and then the fan setting value will appear on the display. 2. Press the Up or Down key until the value you want appears on the display. 3. Press the Fan Settings key again. The Fan value has been set. [`idle] will appear on the display. The menu you have set becomes the current menu for controller operation. Five Second Timeout When using the up or down keys to change a value, if you do not press any key for 5 seconds, the controller will automatically be set to the last value on the display and return to [`idle]. Two Step Menu The two step menu consists of two cooking temperatures, two cooking times and one fan setting. Set the two cooking temperatures. 1. Press the Cook Temp key. [tENP1] and then the first cooking temperature value will appear on the display. 2. Press the Up or Down key until the value you want appears on the display. 3. Press the Cook Temp key again. The first cooking temperature has been set. [tENP2] and then the second cooking temperature value will appear on the display. 4. Press the Up or Down key until the value you want appears on the display. 5. Press the Cook Temp key again. The second cooking temperature has been set. [`idle] will appear on the display. Set the two cooking times. 1. Press the Cook Time key. [tinE1] and then the first cooking time value will appear on the display. 2. Press the Up or Down key until the value you want appears on the display. 3. Press the Cook Time key again. The first cooking time has been set. [tinE2] and then the second cooking time value will appear on the display. 4. Press the Up or Down key until the value you want appears on the display. 5. Press the Cook Time key again. The second cooking time has been set [`idle] will appear on the display. Application 9 Watlow MINICHEF 2000 n 27 Set the Fan 1. Press the Fan Settings key. [~FAn1] and then the first fan setting value will appear on the display. 2. Press the Up or Down key until the value you want appears on the display. 3. Press the Fan Settings key again. The first fan value has been set. [~FAn2] and then the second fan setting value will appear on the display. 4. Press the Up or Down key until the value you want appears on the display. 5. Press the Fan Settings key again. The second fan value has been set [`idle] will appear on the display. The menu you have set becomes the current menu for controller operation. Five Second Timeout When using the up or down keys to change a value, if you do not press any key for 5 seconds, the controller will automatically be set to the last value on the display and return to [`idle]. Preheat If the Ready parameter under the [SEtUP] function in the Configuration Mode is set to yes, when you press the Start/Stop key to activate the menu, the controller will detect temperatures and preheat to operating temperature (above relative set point minus the ready band) as required. • If the oven is not at operating temperature, it will preheat. Meanwhile: The word [pre-`] [`Heat] will appear on the display for a few moments. The Start/Stop key indicator light will flash slowly. The temperature of Channel 1 will be displayed until the operating temperature is reached. The heat output indicator light - G, just below the display- will light up whenever the controller is calling for heat. When the oven is at operating temperature (above relative set point minus the ready band) [ready] will appear on the display and the Start/Stop key indicator light will flash rapidly. You are now ready to cook with the active menu. • If the oven is at operating temperature, the display goes directly to [ready] without indicating preheat or temperature. Note: You can skip preheat and go directly to the cooking sequence by pressing the Start/Stop key a second time. Run a Menu (when preheat feature is active) This procedure describes how to run an active menu when the preheat feature is active -that is, when the [ready] parameter in the [setUp] function of the Configuration mode is set to [``yes]. 1. Set the menu as shown earlier. 28 n Watlow MINICHEF 2000 Application 9 2. With [`idle] or time of day on the display, press the Start/Stop key. If the preheat condition has not been met, the oven will preheat until [ready] appears on the display. Note: You can skip preheat and go directly to the cooking sequence by pressing the Start/Stop key a second time. If the oven is already at operating temperature [ready] will appear on the ...

Herunterladen

Geben Sie zwei Ziffern: