Any Warranted Part which is scheduled for replacement as required maintenance shall be warranted as to defects only for the period of time up to the first scheduled replacement for that part. Any replacement part that is equivalent in performance and durability may be used in the performance of any maintenance or repairs. The owner is responsible for the performance of all required maintenance, as defined in the Sears Operating and Maintenance Instructions. 6. Consequential Coverage Coverage her

,, SAFETY * ASSEMBLY * OPERATION * MAINTENANCE * PARTS LIST . ES PAI'i,IO L Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our web site: FORM1/O.769-05040 5/4/2009 WarrantyStatement Pace2 .................................. SafeOperationPracticesPaces3-6 .......................... SafetyLabels............................................e7 Pac Assembly.................................................. Paces8-11 Operation..................................................es12-13 Pac

3. KeepoillevelatFULL.Runningtheenginewithtoolittleoilcan resultinpermanentenginedamage. Gasoline 1. Removefuelcapfromthefueltank. 2. Makesurethecontainerfromwhichyouwillpourthegasolineis cleanandfreefromrustor foreignparticles.Neverusegasoline thatmaybestalefromlongperiodsofstoragein itscontainer. Gasolinethathasbeensittingfor anyperiodlongerthanfour weeksshouldbeconsideredstale. 3. Fillfueltankwithclean,fresh,unleadedregulargasolineonly.Do not usegasolinecontainingMETHANOL.Replacefuelcap. Alco

247.77638 121 CARBURETOR OVERHAUL KiT 127 0 633 3 C:-._ 163 130 118 _@ 51A( 127 ° 95@ 117@ 633 (o_ 51A( 53 369 i_ 105 0 137 _%_.. 967 \ I _ 445 1127 _ 161I'i_'_s 957 i_72A] _,."'t_,__" s 24O 613 190 _?' 26 Craftsman Engine IViodel 204312=0529 For Chipper Shredder IViodel No. 247.77638 78_ 306 1005 1070 334 774 635 356 356A ........... C_ 12 1211 592 @) 55 65 27 Craftsman Engine IViodel 204312=0529 For Chipper D = O 1 794849 CylinderAssembly 2 698340 Kit-Bushing/Seal(MagnetoSide) 3 391086s. Seal-

Remove spark plug, pour approximately 1/2 ounce (approximately one tablespoon) of engine oil into cylinder and crank slowly to distribute oil. Replace spark plug. OTHER • Do not store gasoline from one season to another. • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. • Store unit in a clean, dry area. Do not store next to corrosive materials, such as fertilizer. NOTE: If storing in an unventilated or metal storage shed, be cert

• SAFETY ASSEMBLY OPERATION MAINTENANCE PARTS LIST ESPAIMOL Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our web site: FORMNO.789-03235 08/14/2007 WarrantyStatement Page2 .................................. RepairProtectionAgreement................... Page3 SafeOperationPracticesPages4-5 ......................... SafetyLabels............................................ Page7 Assembly.................................................. Pages8-11 Operation..........................

Do not attempt to increase engine speed or it may result in personal injury. If you believe the engine is running too fast or too slow, take your chipper-shredder to the nearest SEARS Service Center for repair and adjustment. 14 TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE(S) CORRECTIVE ACTION Engine fails to start • Fuel tank empty, or stale fuel. • Spark plug wire disconnected. • Faulty spark plug. • Fill tank with clean, fresh fuel. • Connect wire to spark plug. • Clean, adjust gap or replace.

Visit our web site s www, sears,com/craftsman FORMNO,769-02543 05/24/2006 WarrantyStatement Page2 .................................. SafeOperationPracticesPages3-4 ......................... Assembly.................................................. Page6 Operation.................................................. Pages7-9 MaintenancePages10-11 ............................................. Off-SeasonStorage Page12 .................................. TroubleShooting.................................

® 5 Horsepower CHIPPER/VAC with Wheel Adjusters • Assembly • Operation • Customer Responsibilities • Service and Adjustment • Repair Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. FORM 1902963 (11/94) SAFETY RULES NOT CONTACT SPARK PLUG TO PREVENT ACCIDENTAL STARTING WHEN SETTING UP, ,_ CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND PLACE WIRE WHERE IT CAN-_tk TRANSPORTING, ADJUSTING, OR MAKING REPAIRS. IMPORTANT YOUR UNIT IS EQUIPPED WITH A SAFETY INTERLOCK SYSTEM TO MINIMIZE IN

VACUUMING AND CHIPPING GUIDE The chart below lists some commonly available materials that can be processed using your ChipperNac, This chart is only intended as a general guideline For complete vacuuming and chipping operating instructions, please read this entire Operation Section. MATERIAL WALK-BEHINDVACUUMING VACUUMHOSE CHIPPER or BLOWERDEFLECTOR ........... L' ............ , ....... ,, ,, ,,,, ..... ,,,, Dryleaves Yes(1) Yes(2) No Dampleaves Yes(i ,2) Yes(2) No Acorns&pineneedles Yes(2,3) Ye