Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
MAKE SURE THE ROTOR IS FULLY STOPPED AND DISCONNECT THE SPARK PLUG WIRE BEFORE ATTEMPTING ANY MAINTENANCE OR SERVICE. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE SERIOUS PERSONAL INJURY. 8 8B Several patents approved or pending. page 19 A CAUTION: THE ROTOR WILL COAST EVEN AFTER THE ENGINE IS OFF. MAKE SURE THE ROTOR IS FULLY STOPPED AND DISCONNECT THE SPARK PLUG WIRE BEFORE ATTEMPTING ANY MAINTENANCE OR SERVICE. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE SERIOUS PERSONAL INJURY. FRONT VIEW The circled numbers here refer to the first column of numbers in the parts list. Several patents approved or pending. page 20 A CAUTION: THE ROTOR WILL COAST EVEN AFTER THE ENGINE IS OFF. MAKE SURE THE ROTOR STOPS TURNING, THEN DISCONNECT THE PLUG WIRE FROM THE ENGINE BEFORE ATTEMPTING ANY MAINTENANCE OR CLEAN-OUT. IF THE ROTOR IS STILL TURNING, IT MAY CAUSE SERIOUS PERSONAL INJURY. Detail of the shredder hopper. Both the shredder hopper and the chipper cone are assembled with the same hardware and wrench. 31 Nuts (outside) Screws (inside) 33 Washers (inside) Detail of the outboard bearing assembly. The bearing is sealed and does not need lubrication. screw bearing...