Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Kompernass
Dateigröße: 129.05 kb
Dateiname: e709b883-cb50-46b8-9ee0-680e4c24f7aa.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
Technical data Mains voltage: 220-240 V ~ 50Hz Nominal current: 1,8 A Rated output: 380 W Protection class: II Cutting process for Paper: Crosscut, 4x18 mm particles Working width: 223 mm CO Time: 3 minutes CO Time The C.O. Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. After the appliance has run for for this period it must be switched off until the motor has cooled itself down. Items supplied Shredder KH 4407 Operating Instructions Appliance description q Cutter attachment w Switch e Cutter opening for CD/Credit cards r Cutter opening for paper t Large waste receptacle (Paper) y Power cable u Small waste receptacle (transparent) / Viewing window Commissioning • First of all, place the cutter attachment q onto the large waste receptacle t so that the power cable y is located at the rear, i.e. on the closed side. • Slide the small waste receptacle u for plastics in the opening on the front side of the large waste receptacle t. • Connect the paper shredder to a power socket. Operation Switching the appliance on: • Place the switch w to the position for shredding. Inserting paper: • Insert paper from above and in portrait format into the cutter opening for paper r. The motor starts automatically and switches itself off automatically if no further paper is inserted. You can shred up to 7 sheets (80g/m2 paper) at the same time. - 3 Inserting credit cards: • Open the safety flap over the cutter opening for CD/Credit cards e. • Insert the credit card from above into the middle of the CD/Credit card cutter opening e. You can only shred one credit card at a time. ALWAYS insert them into the CD/Credit card cutter opening e with the broad side leading. If you do not, the magnetic strip will not be destroyed. • Note: Always insert the credit card into the middle of the cutter opening e. If you do not, the shredding process will not start! Inserting a CD: • Insert the CD from above into the middle of the CD/Credit card cutter opening e. You can only shred one CD at a time. . Warning!: NEVER place a finger into the central hole of a CD when you are feeding it into the appliance. Clearing a material blockage: • Press and hold the switch w in position should the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned. • Place the switch w into position (OFF) as soon as the jammed item is returned. Switching the appliance off: • To switch the appliance off, move the switch w into the middle position (OFF). Emptying the waste container • Empty the waste container t/u regularly. • Dispose of the waste material in an environmentally responsible manner. Emptying the large waste container (Paper) . Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. • Remove the cutter attachment q from the large waste container t. • Remove the small waste container u at the front of the large waste container t, so that it does not fall out. • Empty the large waste container t and then put everything back together again. Emptying the small waste container (Plastic) • Remove the small waste container u from the front of the large waste container t to empty it. • Replace it after emptying it. Notice regarding overheating of the appliance: If it overheats, the appliance switches itself off automatically. . Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance. • To switch the appliance off, move the switch w into the middle position (OFF). • Empty the waste containers t/u. • Allow the appliance to cool down. • Reinsert the power plug into the socket. • Switch the appliance on, in that the switch w is placed in the position . - 4 Cleaning . Danger! Always remove the power plug before cleaning the appliance. There is a risk of electric shock! . Warning!! The cutters in the appliance are very sharp! Risk of personal injury! • Empty the waste containers t/u regularly. • Clean the waste containers t/u and the cutter attachment q with a lightly moistened cloth and, if required, with a mild detergent. • Remove possible residues in the cutter openings e/r with a suitable object. Ensure that the appliance is unplugged before commencing this! Disposal Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Dispose of all packaging materials in an environmentally responsible manner. Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warran...