Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: American Power Conversion Dateigröße: 275.5 kb Dateiname: 3600.pdf Unterrichtssprache:

Main functions..................................8 2.2.2 Sub-functions.....................................8 2.3 The operation of the function...................8 2.3.1 Set up voltage..................................9 2.3.2 Set up current...................................10 2.3.3 Enable/disable the output....................10 2.3.4 Store parameters..............................11 2.3.5 Recall parameters.............................12 2.3.6 The function of the Menu...................12 2.3.6.1 Set up the maximum output voltage..............................13 2.3.6.2 Set up the maximum output power .............................13 2.3.6.3 Enable/disable the rotary knob..........14 2.3.6.4 Set up the initial out state...............14 2.3.6.5 Save voltage setting.........................14 2.3.6.6 Set up communication speed...........14 2.3.6.7 Set up communication address (0~31)..............................15 2.3.6.8 Lock the keypad...........................15 2.3.6.9 Clear saved parameters....................15 2.3.6.10 Exit ..............................................15 Chapter 3 Installation of PowerMS Software ...................................................16 3.1 System Installation...............................16 3.2 System Start.........................................17 3.3 System Uninstallation...........................18 Chapter 4 The Introduction of main functions ................................................19 4.1 The Definition of the Power Supply..........19 4.2 The COM Port and Address Set.............20 4.3 Start the Communication........................21 4.4 Stop the Communication.......................21 4.5 Select POWER.....................................21 4.6 Select PC to POWER Control Instructions..............................22 4.7 Set the Voltage Range..........................22 4.8 Set the Max Current..............................22 4.9 Query the Report..................................23 4.10 Explanation of the Interface Indicating Components.......................24 4.11 The State Bar......................................24 4.12 Power Supply State Indication..............25 4.13 Exit the System..................................25 3600 SERIES USER MANUAL SAFETY GUIDE This manual contains the precautions necessary to ensure your personal safety as well as for protection for the products and the connected equipment. These precautions are highlighted with a triangle “WARNING” symbol in this manual and are marked according to the danger levels as follows: Danger It indicates that if appropriate precautions are not taken, serious incidents of personal injuries and deaths or significant damages or losses to the properties will be caused. Caution It indicates that if appropriate precautions are not taken,injuries or losses of properties will take place Note: Reminds you to pay particular attention to the important information related to the products, disposal of products or the specific part of documents. Warning Only qualified personnel are allowed to debug and operate this equipment. The qualified personnel are specified as those personnel who carry out commissioning, grounding and apply the volume identification to the circuits, equipment and systems according to the available safety practices and standards. Note Only when this product is transported, stored assembled and installed in a proper way and operated and maintained according to the recommendations, can it implement the functions properly and reliably. 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. The Manufacturer assumes no liability for the customer’s failure to comply with these requirements. Attention I. Safety 1. Users should operate according to this manual. 2. There is high voltage inside the instrument, please avoid touching it directly. 3. Please read the user manual carefully before you use the instrument to assure your safety. 4. Ground the Instrument This product is provided with a protective earth terminal. To minisize shock hazard, the instrument chassis and cabinet must be connected to an electrical ground. The instrument must be connected to the AC power supply mains through a three-conductor power cable, with the third wire firmly connected to an electrical ground (safety ground) at the power outlet. 5.Keep Away From Live Circuits Operating personnel must not remove instrument covers. Component replacement and internal adjustments must be made by qualified service personnel. Do not split the components when power cable connected. Under certain conditions, dangerous voltages may exist even with the power cable removed. To avoid injuries, always disconnect power...

Herunterladen

Geben Sie zwei Ziffern: