Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.06 mb Dateiname: Unterrichtssprache:

Philips makes a full range of power products for almost every type of electronic equipment. Power surges can occur on any line running into your home or office. This includes AC power lines, telephone lines, and coaxial lines. A properly installed surge protector will ensure protection from the power surges that continually hit your electronic equipment. If your connected equipment has connections through a telephone or coaxial line, Philips strongly recommends that you purchase and properly connect your equipment to a surge protector designed to protect those features. If you receive a power surge through your phone or coaxial line, and your equipment is not properly connected to a surge protector designed to protect those surges, any problems that arise will not be remedied under the warranty. This product, like all surge protectors, has a limited life. Even under normal circumstances, and in the absence of defects, the product’s life will end when the components providing surge protection exceed capacity and cease to provide protection from surges and spikes. This surge device features an internal protection that will disconnect the surge protective component at the end of its useful life, but will maintain power to the load (connected equipment) -now unprotected, thus, acting as a multiple outlet strip. If this situation is undesirable for the application, the surge protector should be replaced. Units with Power Blocker™ protection will cease to conduct power through the unit once they have reached capacity. At that time, the unit needs to be replaced to ensure proper protection. Units with Power Blocker™ 2 technology will cease to conduct power through the unit once the MOV’s have reached capacity. In the event of an overvoltage condition, the Instant Reset button on a Power Blocker ™ 2 product will trip, and the unit will not conduct electricity. The user can reset the circuit after the event to restore surge protection. If the red led goes out on a Power Blocker™ 2 product, the unit needs to be replaced to ensure proper protection. The Power Blocker™ 2 instant reset feature protects the AC lines, and is not applicable to telephone or coaxial lines. Standard surge protectors are not designed to protect against sustained low voltage situations. Sustained low voltage situations can cause damage to some connected equipment. If you are in an area prone to sustained low voltage situations, you should purchase an Uninterrupted Power Supply (UPS) with surge protection. Power Blocker™ Protection Feature Philips products with Power Blocker™ protection are designed to sacrifice themselves in order to save equipment connected to it. Their circuitry is designed to cut off all power to AC outlets in the event of an electrical or power surge that overwhelms their protection. If your surge protector is not allowing current to pass and the protection working LED is off, then your surge protector has performed its duty – protecting your equipment – and you ...

Herunterladen

Geben Sie zwei Ziffern: