Stimmen - 5, Durchschnittliche Bewertung: 3.6 ( )

Hersteller: Emerson Dateigröße: 256.38 kb Dateiname: SL-23275QS-R09-03.pdf Unterrichtssprache:

(2m) • Quick-Start guide Output receptacles (surge protection • PowerSure family user manual on CD (also Data Line only) Protection Connectors at • Warranty card Power ON/OFF/ Circuit RIGHT SIDE OF UPS • RJ-11 cord, 7 ft. (2.1 m) Alarm Silence protector • USB cable, 6 ft. (1.8m) Utility Indicator* (Green) For more details, refer to the PowerSure user manual on CD. Output receptacles Site Wiring Fault Indicator (battery backup and USB port Para una informacion mas detallada, consulte (Red) surge protection) Fault Indicator* (Red/Green) en el CD. el manual del usuario de la familia PowerSure INSTALLATION Read all safety, installation and operating instructions in the PowerSure family user manual on the included CD or at before operating the UPS. Adhere to all warnings on the unit and in the manual. 1. Install the UPS indoors in a controlled environment, where it cannot be accidentally turned off. Place it in an area of unrestricted airflow around the unit, away from water, flammable liquids, gases, corrosives and conductive contaminants. Maintain a minimum clearance of 4 inches (100mm) on each side of the UPS. Maintain an ambient temperature range of 32°F to 104°F (0°C to 40°C). 2. Plug the PST’s power cord into an AC outlet. Check the Site Wiring Fault Indicator on the rear; if it is illuminated, refer to the Troubleshooting section. 3. Plug any computers and monitors into the orange receptacles for battery backup and surge protection; other office machines that do not exceed the capacity of the UPS may be plugged into either of the two (2) black receptacles, which provide surge protection only. 4. Connect Phone/Fax/DSL/Internet/Modem devices to data line connectors. Plug this type of equipment into black receptacles ONLY Inkjet Scanners Fax printers machines Plug computers, monitors, routers and cash registers intoorange receptacles 5. Press and release the ON/OFF/Alarm Silence button to turn on the UPS. The UPS will beep and the Utility Indicator will illuminate (green). 6. Turn on connected equipment. CONTROLS AND INDICATORS SPECIFICATIONS This button controls output power to the connected load and has three functions: ON - illumi- Site Wiring Fault Indicator (Amber) Top of UPS nates amber when the UPS detects a line- neutral reversal or a poor neutral-ground. (See Troubleshooting Chart if indicator is illuminated.) Model Number PA350-120U PA500-120U Model Rating VA / W 350/225 500 / 300 DIMENSIONS: in (mm) Unit W x D x H 6.6 x 9.8 x 3.7 (168 x 250 x 95) 6.6 x 9.8 x 3.7 (168 x 250 x 95) Shipping W x D x H 9.4 x 13.8 x 5.6 (238 x 350 x 142) 9.4 x 13.8 x 5.6 (238 x 350 x 142) WEIGHT: lbs (kg) Unit 11.7 (5.3) 13.5 (6.1) Shipping 12.1 (5.5) 13.9 (6.3) INPUT AC PARAMETERS Surge Protection 603J Voltage Range WithoutBattery Operation 98VAC - 140VAC ±3VAC Frequency 57 - 63 Hz (±0.4Hz) Input Power Cord 6.5 ft.attached, w/ NEMA 5-15 P OUTPUT AC PARAMETERS Output Receptacles (3) NEMA 5-15R (orange) batterybackup+surge protection(2) NEMA 5-15R (black) surge protecti...

Herunterladen

Geben Sie zwei Ziffern: