Outer Barrier: The cylinder- powered automatic outer barrier provides a ramp for wheelchair loading and unloading at ground level. Photos and further details regarding the outer barrier are provided in the Operation Notes section (pages 19-21). Outer Barrier Latch: The spring- loaded latch locks the outer barrier in the vertical position when the platform raises above ground level. Page 6 Inner Roll Stop: NL Series lift models are equipped with an automatic inboard roll stop that also serves as

Position (raise or lower) platform to stow level (height) using procedures outlined on pages 17 and 18. 2. Pull “T” handle release cable. See Figure 1. 3. Turn “T” handle to lock platform in the released position. See Figure 1. 4. Carefully push platform inward to stow position. 5. Reengage the release cable mechanism by a. turning the “T” handle and b. pushing the the “T” handle in fully (see Figure 2). Grasp the outer roll stop and move the platform in and out until the platform locks. You wil

Refer to the illustrations on pages 2 and 3 for the visual differences in lift configurations and identification of lift components. UVL600 Series lift models are consumer oriented (intended for operation by the wheelchair passenger). UVL600X lift models are commercial oriented and ADA compliant (intended for operation by an attendant). UVL600 Series and UVL600X lift platforms raise and lower with an “arcing” motion. UVL600 Series lifts offer a variety of options including bridge plates (inboard

WARNING Keep owner’s (operator's) manual in lift-mounted manual storage pouch at all times. WARNING Never modify (alter) a Braun Corporation lift. WARNING Do not use accessory devices not authorized by The Braun Corporation. WARNING Do not remove any guards or covers. WARNING Keep clear of any hydraulic leak. WARNING Failure to follow these safety precautions may result in serious bodily injury and/or prop erty damage. Page 13 Operation Notes and Details WARNING Read and become familiar with all

Failure to do so may result inserious bodilyinjury and/orproperty damage. ® "Providing Access to the World" International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA 1-800-THE LIFT® (574) 946-6153 FAX: (574) 946-4670 ® Congratulations We at The Braun Corporation wish to express our fullest appreciation on your new purchase. With you in mind, our skilled craftsmen have designed and assembled the finest ramp available. This manual includes operating instructions, installation instructions,

Manual Bridge Plate Platform at Floor Level Gap between Lift and Floor Vehicle Floor D Move vertical bridge plate to right to disengage it, and then lower it to the floor. When the platform is raised to floor level, the bridge plate is manually lowered to the vehicle floor (bridging position) by moving the bridge plate to the right to disengage it, and then lowering it to the floor. From the floor level bridging position, the bridge plate is manually raised to the vertical position (see Photos D

Failure to do so may result in serious bodily injury and/or property damage. Keep manual in lift storage pouch. Oper ualManator's 30197January 200430197 January 2004 Patent #7,413,395Patent #5,261,779 Patent #5,806,632 Patents PendingPatent #7,413,395 Patent #5,261,779 Patent #5,806,632 Patents Pending Vista SeriesTM "Providing Access to the World" International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA 1-800-THE LIFT (574) 946-6153 FAX: (574) 946-4670 ® ® VL955 SeriesVL955 SeriesTMTM

Failure to do so may result in serious bodily injury and/or property damage. Keep manual in lift vehicle. "Providing Access to the World" International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA 1-800-THE LIFT (219) 946-6153 FAX: (219) 946-4670 ® 89001 September 1998 Patent #4,958,979 ®Braun Series ® UVL Series Under Vehicle Wheelchair Lifts Including Models: • UVL603A • UVL604XC • UVL603B • UVL604XD • UVL603E • UVL855R • UVL604XA • UVL855RH • UVL604XB and Special Order UVL® Series Lift

Failure to lock platform may result in unintended platform deployment. Unintended platform deployment may result in serious bodily injury and/or property damage. Note: The lift platform must be pushed back into its carriage compartment at least half-way before reverting back to normal (powered) operation. When the lift is fully extended manually, it does not activate the proper switches for normal operation. Returning (moving) the lift at least half-way in allows for proper switch activation. No

Failure to do so may result in serious bodily injury and/or property damage. sales representative should also instruct and demonstrate manual operation procedures. Be certain your sales representative instructs and demonstrates the proper reengagement procedure of the manual cable release system (see pages 15-19). Any questions or concerns can be answered by the sales representative at that time. Do not operate your lift if you suspect lift damage, wear or any abnormal condition. Discontinue lif