Login:
Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Anleitung Invacare, modell 1069956

Hersteller: Invacare
Dateigröße: 21.61 kb
Dateiname: 1123847.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


1108705, 1069956 Assembly, Installation and Operating Instructions Yes, you can: _SAVE THESE INSTRUCTIONS_ NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact Carrier/Dealer for further instruction. SAFETY SUMMARY T o ensure the safe installation, operation and use of the MPR T ray Assembly Kit, these instructions MUST be followed: GENERAL WARNING DO NOT install or use this equipment without first reading and understanding these instructions. If you are unable to understand the Warnings, Cautions or Instructions, contact a healthcare professional, dealer or technical personnel before attempting to install this equipment - otherwise injury or damage may occur. INSTALLATION WARNING After ANY adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. MPR Tray Assembly Kit (Part No. 1108705) contains the following items: DESCRIPTION QUANTITY Tray* 1 Pivot Arm 1 Support Arm 1 Tray Tab 4 Flange Screw 8 Dome Plug 2 *Tray (Part No. 1069956) can also be ordered separately. REPLACING THE TRAY - MODEL 6905A (FIGURE 1) 1. Remove tray from recliner. Refer to STORING/REMOVING THE TRAY in the Owner's Manual, part number 54000M107. 2. Position tray assembly on the floor as shown in FIGURE 1. 3. Remove the four (4) flange screws and two (2) tray tabs that secure the support arm to the tray. 4. Remove the four (4) flange screws and two (2) tray tabs that secure the pivot arm to the tray. 5. Remove existing tray. NOTE: Retain ALL mounting hardware and arms if only installing new Tray, part number 1069956. For more information regarding Invacare products, parts, and services, please visit: Part No. 1123847 1 MPR Tray Assembly Kit 6. Secure the pivot arm and two (2) tray tabs to the tray with four (4) flange screws. Securely tighten flange screws. Repeat for support arm. 7. Insert pivot arm and support arm into recliner frame underneath armrests. Flange Screws FIGURE 1 - REPLACING THE TRAY - MODEL 6905A Invacare Corporation USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z4G4 Canada 800-668-5324 Invacare is a registered trademark of Invacare Corporation. Yes, you can. is a trademark of Invacare Corporation. © 2004 Invacare Corporation Part No. 1123847 Rev A - 3/04...

Dieses Handbuch ist für folgende Modelle:
Rollstühle - 1108705 (21.61 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien