Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• Set the speed adjustment dial to your desired speed. • Engage the appropriate side of the throttle control lever. • The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the speed you preselected with the speed adjustment dial. • Pull on the left handgrip to steer your scooter to the left. • Pull on the right handgrip to steer your scooter to the right. • Move the tiller to the center position to drive straight ahead. • To stop, slowly release the throttle control lever.After you release the throttle control lever, gently squeeze the handbrake (if equipped) to come to a complete stop. The electronic brakes will automatically engage when your scooter comes to a stop. NOTE: Your scooter’s reverse speed is slower than that of the forward speed you preset with the speed adjustment dial. Legend Classic XL-8 VI. OPERA TION VI. OPERA TION GETTING OFF OF YOUR SCOOTER 1. Bring your scooter to a complete stop. 2. Remove the key from the key switch. 3. Disengage the seat lock lever and rotate the seat until you are facing toward the side of your scooter. 4. Make certain that the seat is locked securely in position. 5. Carefully and safely get out of the seat and stand to the side of your scooter. 6. You can leave the seat facing to the side to facilitate getting onto your scooter next time. POWER DOWN TIMER FEATURE Your scooter is equipped with an energy saving automatic power down timer feature designed to preserve battery life. If you mistakenly leave the key in the key switch and in the “on” position but do not use your scooter for approximately 20 minutes, the controller will shut down automatically. Although the controller is shut down, power will still be supplied to the scooter’s lighting system. If the power down timer feature takes effect, perform the following steps to resume normal operation. 1. Turn the key to the “off” position. 2. Turn the key back to the “on” position. Legend Classic XL-8 VII. COMFORT ADJUSTMENTS VII. COMFORT ADJUSTMENTS COMFORT ADJUSTMENTS After becoming familiar with your scooter’s operation, you may find the need to make some adjustments to increase your comfort. WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion. NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the scooter must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or through your authorised Pride Dealer. Tiller Angle Adjustment Your scooter is equipped with a pivoting tiller that allows adjustment to several positions from the scooter deck to the farthest forward stop. 1. Lift the tiller adjustment lever. See figure 13. 2. Move the tiller to a comfortable position. 3. Release the tiller adjustment lever to secure the tiller in position. Seat Rotation The seat lock lever will lock the seat into several positions. 1. Push forward on the seat lock lever to unlock the seat. See figure 14. TILLER ADJUSTMENT LEVER Figure 13.Tiller Adjustment 2. Rotate the seat to the desired position. 3. Pull back firmly on the seat lock lever to lock the seat securely in place. Front-to-Back Seat Adjustment You can reposition the scooter’s seat forward or rearward to adjust the distance between the seat and the tiller. 1. Move the seat sliding lever outward. See figure 14. 2. While holding the lever out, slide the seat forward or rearward. 3. Release the seat sliding lever once the seat is in the desired position. SEAT LOCK LEVER SEAT SLIDING LEVER Figure 14. Seat Adjustment Legend Classic XL-8 VII. COMFORT ADJUSTMENTS VII. COMFORT ADJUSTMENTS Seatback Adjustment WARNING! Do not operate your scooter with the seatback in a reclined position. WARNING! Always keep your back pressed firmly against the seatback while adjusting the angle. To adjust the reclining seat: 1. With your back pressed up against the seatback, lift up on the seatback adjustment lever and lean forward or rearward to adjust the seatback angle. See figure 15. 2. Release the seatback adjustment lever once the seat is in a comfortable riding position. SEATBACK ADJUSTMENT LEVER Figure 15. Seatback Adjustment Armrest Angle Adjustment The armrest angle of your scooter can be adjusted upward or downward by turning the adjustment dial located underneath the armrest. See figure 16. NOTE: The armrests also pivot upward to make getting on and off of your scooter easier. Seat Height Adjustment You can change the seat height to one of three positions in 2.5 cm (1 in.) increments. To change the seat height: 1. Turn the scooter off and place the manual freewheel lever in drive mode. 2. Lift the seat up and out of the seat post. 3. Remove the rear shroud. 4. Loosen a...