Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Invacare Dateigröße: 199.34 kb Dateiname: 1055947.pdf Unterrichtssprache:

Camlock MUST be properly engaged (locked) during use. Double-button MUST be fully engaged and protruding through height adjustment hole on cane handle to ensure a positive lock. ALWAYS test to see that the cane handle is properly and securely locked in place before using. This will ensure that camlock is secure. Quad Canes are designed to provide ambulatory assistance to an individual weighing up to 250 lbs. (113.6 kg.). The replacement camlock does not in any way change the weight limitation of your quad cane. Description of Kit ITEM DESCRIPTION QTY 1048085 Cam Lever 1 1048086 Cam Housing 1 Assembling the Camlock NOTE: For this procedure, refer to Detail “A" of FIGURE 1 on page 2. 1. Soak camlock housing in warm water for approximately 10 minutes. NOTE: Soaking will allow the housing to soften adequately to aid in installation. 2. Remove housing from water. 3. Insert cam lever into camlock housing, handle first, through cutout in camlock housing. 4. Rotate cam lever 90° until the rear (round) portion of the cam lever is positioned into the recess of the cam housing with large tab on rear of cam lever facing down. C For more information regarding Invacare products, parts, and services, please visit Part No 1055947 1 Quad Cane Camlock Replacement Kit Installing the Camlock NOTE: For this procedure, refer to Detail “B" of FIGURE 1. 1. Remove old camlock assembly from upper cane handle. 2. Slide camlock assembly onto bottom of upper cane handle ensuring small tab on top front of camlock housing snaps into small notch on the bottom front of cane handle. 3. Operate cam lever up and down to ensure it opens and closes properly. Cam Handle <3^ Cut out Large Tab' DETAIL “A” -ASSEMBLING CAMLOCK Recess Cam Handle UNLOCK Cam Lock Housing LOCK Rear of Cam Handle Large T ab Cut out FIGURE 1 Assembling the Camlock DETAIL “B” -INSTALLING CAMLOCK Front Small Notch on front of Cane Handle. (Not Shown). Small Tab Upper Cane Handle Camlock Assembly Large Notch UNLOCK LOCK Cam Lever NOTE: Raise Cam Lever before installing Camlock Assembly Reassembling the Quad Cane NOTE: For this procedure, refer to FIGURE 2. 1. Raise cam lever before installing upper cane handle onto base. 2. Re-install cane handle with new camlock assembly onto cane base. 3. Push cam lever down. NOTE: This will engage the large tab on bottom rear of cam lever into large notch on rear of cane handle. 4. Test cane to ensure that cane and camlock assembly are properly secured, i.e., no rattle or looseness of the cane base and upper cane handle. Upper Cane Handle Camlock Assembly NOTE: Push Cam Lever down after re-installing upper cane handle to base. FIGURE 2 Reassembling the Quad Cane Invacare Corporation USA One Invacare Way Elyria, Ohio USA 44036-2125 800-333-6900 Can, Cam cane Canada 570 Matheson Blvd E Unit 8 Mississauga Ontario L4Z 4G4 Canada 800-668-5324 Invacare, Yes, you can. and the Medall...

Herunterladen

Geben Sie zwei Ziffern: