SDT dissipates static charges away from people and equipment in order to increase personal comfort and safety and help prevent sensitive equipment damage. In addition to static control, SDT offers the practical benefits of VCT, including durability, ease of maintenance and low installed cost. Post-installation electrical properties can be evaluated by a qualified third party. Contact your Armstrong representative for details. SDT is styled and constructed for use in light industrial, education a

© 2009 AWI Licensing Company FloorScore™ is a trademark of the Resilient Floor Covering Institute. LEED® is a registered trademark of the United States Green Building Council. All other trademarks owned by AWI Licensing Company. LEED® and the Armstrong Logo are registered in the United States and Canada. Armstrong® and ARTEFFECTS® are registered in the United States only. Visit armstrong.com/vct • Call 1 877 ARMSTRONG F-8242-509

Calcium Chloride Tests for moisture must be conducted. Armstrong offers a guideline of a maximum acceptable moisture emission level of 5.0 lbs. per 1000 sq. ft. per 24 hours. Bond Tests should also be conducted for compatibility with the substrate. When testing for alkalinity, the allowable readings for the installation of Armstrong flooring are 5 to 9 on the pH scale. Temperature shall be maintained at a minimum of 65° F (18° C) and a maximum of 100° F (38° C) for 48 hours prior to installation

• Fresh, earth-based colors and tinted neutrals provide an array of patterning options. • Visual portrays the textural dimension and softness of carpet with maintenance benefits of vinyl. • The nondirectional pattern design conveys a seamless, sheet-like appearance with the easy installation and replacement advantages of tile. 57215 zinc white 57200 parchment beige 57204 pissarro cream 57202 canvas beige 57203 pastel beige 57205 silver sable 57211 mezzo green intaglio gray 57201 silverpoint 5720

Initial Maintenance Immediately After Installation ¦ Sweep or vacuum thoroughly. ¦ Damp mop with a dilute neutral detergent solution such as Armstrong S-485 Floor Cleaner – carefully wiping up black marks and excessive soil. ¦ Apply two coats of high quality commercial floor polish such as Armstrong S-480. ¦ Do not wash, scrub or strip the floor for at least four to five days after installation. Preparation for Commercial Use For specific, ongoing maintenance procedures see Armstrong Maintenance

See current edition of the Resilient Floor Covering Institute (RFCI) publication Recommended Work Practices for Removal of Resilient Floor Coverings for instructions on removing all resilient floor covering structures or contact your retailer or Armstrong World Industries, Inc. 1 800 233 3823. The floor covering or adhesive in this package does NOT contain asbestos. NOTE: Darker-colored patterns may be susceptible to scratch whitening. These colors may require more frequent maintenance if used i

NOTE: Install each ARTEFFECTS tile with the arrows pointing in the same direction for a nondirectional look. Detailed instructions may be found in the Armstrong Guaranteed Installation Systems manual, F-5061. MAINTENANCE These products are designed to be maintained by traditional resilient flooring maintenance methods, which include the use of polishes, spray-buffing techniques and appropriate high–speed maintenance systems. Initial Maintenance Immediately After Installation ¦ Sweep or vacuum th

These ratings are provided only for use in the selection of products to meet the specified limits. INSTALLATION Job Conditions Subfloors/underlayments shall be dry, clean, and smooth. They shall be free from paint, varnish, solvents, wax, oil, existing adhesive residue, or other foreign matter. For more detailed requirements of concrete, wood and metal subfloors, as well as wood and trowelable underlayments, refer to Armstrong Guaranteed Installation Systems manual, F-5061. Calcium Chloride Test

Protect all materials from the direct flow of heat from hot-air registers, radiators, or other heating fixtures and appliances. Procedure These products should be installed with the following adhesives: Subfloor Wood Underlayment Concrete Ceramic, Marble, Terrazzo Metal Existing Resilient Floor Adhesive S-515 S-700 S-750 S-89 S-515 S-700 S-750 S-89 S-515 S-700 S-750 S-89* S-700 S-515 S-750 Tile-On™ *S-89 may only be used over steel, stainless steel, aluminum and lead. NOTE: Install each ARTEFFEC

NOTE: Install each ARTEFFECTS tile with the arrows pointing in the same direction for a nondirectional look. Detailed instructions may be found in the Armstrong Guaranteed Installation Systems manual, F-5061. MAINTENANCE These products are designed to be maintained by traditional resilient flooring maintenance methods, which include the use of polishes, spray-buffing techniques and appropriate high–speed maintenance systems. Initial Maintenance Immediately After Installation ¦ Sweep or vacuum th