Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Sony Dateigröße: 2.46 mb Dateiname: CECH-2501A-3.30_1.pdf Unterrichtssprache:

In this case, turn off the system ( page 21) and leave it unused for a while. After the system cools down, move it to a location with good ventilation, and then resume use. Port indicators L2 button L1 button Directional buttons Left stick/L button* SELECT button USB connector R2 button R1 button button button button buttonRight stick/ R button* START button PS button * The L and R buttons function when the sticks are pressed. Notices . Do not place the system in an area subject to excessive dust or cigarette smoke. Dust build-up or cigarette smoke residue on the internal components (such as the lens) may cause the system to malfunction. . Do not move or change the position of the system while the power indicator is lit solid green or flashing green. The vibration that occurs as a result of moving the system may cause data loss or corruption, or damage to the system. . Some PlayStation® and PlayStation®2 peripherals such as the analog controller (DUALSHOCK®) and analog controller (DUALSHOCK®2) are not compatible with the PS ™ system. For details, visit Hint When placing the system in a vertical position, use of the vertical stand (sold separately) is required for stability. Getting started 1 Getting US . HDMI OUT connector AV MULTI OUT connector Connection methods .Connect your system to a TV You can use any of the following methods to connect your system to a TV. VIDEOL-AUDIO-RAV MULTI OUT connector AV Cable TV TV HDMI OUT connector HDMI Cable (sold separately) Video output in HD (High Definition) resolution - component video Y L RPR/CRPB/CBCOMPONENT VIDEO IN AUDIO IN Component AV Cable (sold separately) AV MULTI OUT connector TV Video output in HD (High Definition) resolution - HDMI™ Video output in SD (Standard Definition) resolution Hints . For details about video output cable types and supported video modes, see "Video output on the PS ™ system" ( page 16) and "Video output cable types" ( page 17). . You can connect audio devices that support digital audio playback, such as an AV receiver for home entertainment use. For details, see "Connecting digital audio devices" ( page 20). Caution Any TV or component connected to the system must be functioning properly and free of defects. If a TV or component connected to the system is faulty or defective, it may cause damage to the TV or component, or to the system itself. As with all electrical products, connection to faulty or defective components, or the failure to connect to a properly wired outlet, may cause sparking and pose a fire hazard. If video is not displayed on the screen If you change the type of cable used to connect the system to a TV, video may not appear on the screen. If video does not appear, turn off the system and then turn it on again by pressing the power button for at least five seconds (until the system beeps twice). The video output setting will be reset and video will be output at standard definition (SD) resolution. Getting started Getting started .. LAN connector AC IN connector .Connect an Ethernet cable (sold separately) Use an Ethernet cable to connect the system to the Internet. Hint You can use a wireless network connection to connect to the Internet without using an Ethernet cable. For details, see "Adjusting network settings" ( page 28). Caution Do not connect a standard telephone line or other types of cords or cables that are not compatible with the system directly to the LAN connector on the system, as this may cause heat build-up, fire or malfunction. .Connect the AC power cord After plugging the AC power cord into the electrical outlet, the power indicator on the PS ™ system will light up in solid red ( page 21). Caution Do not plug the AC power cord for the system into an electrical outlet until you have made all other connections. Make sure the TV or other component is unplugged from the electrical outlet prior to connecting it to the system. After turning on the system, perform initial setup. 1 Turn on the TV, and then switch the video input of the TV to match the input connector used by the PS3™ system. 2 Press the power button. The power indicator turns green and the picture is displayed on the TV screen. Power indicator Power button 3 Connect the wireless controller to the system using a USB cable. 4 Press the PS button on the controller. The system will recognize the controller. After it has recognized the controller, the initial setup screen will be displayed. 5 Perform initial setup. US Getting Follow the on-screen instructions to enter settings for system language, time zone, date and time, and user name. The screen for setting up the Internet connection will be displayed. When connecting using an Ethernet cable, basic settings will be selected automatically if you follow the on-screen instructions. When connecting over a wireless LAN, follow the instructions in "Adjusting network settings (wireless)" ( page 29) to set up the connection. After the settings have been completed, the XMB™ ...

Herunterladen

Geben Sie zwei Ziffern: