Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
• DVD-RW disc (VR mode) content can only be viewed in standard interlace format. The "Progressive" option is not available when playing such content. Adjusting DVD player settings 31 Setting viewer options Setting viewer options In "Custom Setup" you can set the Parental Control level and adjust other playback features. Pause mode You can use this option to set the picture status when playback is paused. Auto A picture with moving elements is displayed without jitter. Normally select this position. Frame A picture without moving elements can be displayed at high resolution. Parental Control In some regions, the viewing of some DVD content may be restricted based on viewer age or other factors. You can use the Parental Control feature to restrict the level of content that may be viewed through your console. Note Settings are saved when you do any of the following: – Stop playback (including stopping Resume Play) – Open the disc cover Setting Parental Control 1 Select "Parental Control", and then press the button. The screen for registering a password is displayed. If a password has already been registered, the screen for confirming the password is displayed. 32 Adjusting DVD player settings 2 Select a number, and then press the button. Repeat step 2 to enter a four-digit password. If you want to clear a number, press the button. When registering a password, you are required to enter it again for confirmation. 3 Select "Region", and then press the button. The list of region options is displayed. 4 Select the region to base the Parental Control level on, and then press the button. If you select "Other", see "Region code list" ( page 33). 5 Select "Level", and then press the button. The list of level options is displayed. 6 Select a restriction level, and then press the button. The lower the value, the stricter the restriction. To clear Parental Control With DVD playback stopped, go to step 6 in "Setting Parental Control" and set "Level" to "Off". Region code list To enter a Parental Control region code, select "Other" in step 4 of "Setting Parental Control" ( page 32). Use the directional buttons to select the first letter, and then press the right directional button. Then select the next letter and press the button. Region Code Region Code Austria AT Malaysia MY Belgium BE Netherlands NL Canada CA Norway NO China CN Philippines PH Denmark DK Russia RU Finland FI Singapore SG France FR Spain ES Germany DE Sweden SE Hong Kong HK Switzerland CH Indonesia ID Taiwan TW Italy IT Thailand TH Japan JP United Kingdom GB Korea KR Changing your password In step 2 of "Setting Parental Control" ( page 32), complete the following steps: 1 Using the directional buttons, select "Change Password" and then press the button. The screen for changing the password is displayed. 2 Select a number, and then press the button. Repeat step 2 to enter a four-digit password. You are required to enter it again for confirmation. Playing a disc restricted by Parental Control 1 Start playback of the DVD ( page 25). You will be prompted to temporarily change the Parental Control level to allow playback. This usually occurs immediately at disc start-up but may also occur at different times depending on the DVD. 2 Using the directional buttons, select "Yes" and then press the button. The screen for entering the password is displayed. 3 Select a number, and then press the button. Repeat step 3 to enter the four-digit password. After entering the password, playback will begin again. When DVD playback is stopped, the Parental Control level returns to the original setting. Notes • If you forget your password, see "Troubleshooting" ( page 53). • If you do not set a password, you cannot change the Parental Control settings. • Some DVDs with the Parental Control feature do not allow use of playback modes ( pages 27 to 29). US DVDs Adjusting DVD player settings 33 Setting sound options Setting sound options Audio Digital Out You can switch the method of outputting the audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector. Caution When the console is connected to an audio device without a Dolby Digital or DTS decoder, set "Dolby Digital" and "DTS" to "Off". If you set these options to "On" without the necessary decoder, you may have no sound or an extremely loud noise may be emitted. Digital Out (Optical) This option sets the type of output for the DIGITAL OUT (OPTICAL) connector. On Select this option when you want sound (audio signal) to be output through the DIGITAL OUT (OPTICAL) connector. Settings for "Dolby Digital" and "DTS" are displayed. Off Select this option when you do not want sound to be output through the DIGITAL OUT (OPTICAL) connector. Settings for "Dolby Digital" and "DTS" are not displayed. Dolby Digital This option sets Dolby Digital as the output signal for the DIGITAL OUT (OPTICAL) connector. On Select this option when the console is connected to an audio device with a built-in Dolby Digit...