Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
When you press any character key, the status indicator will light up to indicate that the keypad is ready to use. To turn off the keypad, slide the power switch to "OFF". Hint If the keypad is not used for a period of time (with the power on), it will switch to standby mode and the status indicator will turn off. Attaching the wireless keypad to a wireless controller When using the wireless keypad with the PS3™ system, you must attach it to a wireless controller. . Open the clamp. . Place the wireless keypad over the wireless controller as shown in the diagram, and then press down firmly to attach the keypad to the controller. . Detaching the wireless keypad Open the clamp, and then carefully pull up on the wireless keypad. Using the wireless keypad with other products You can pair and use the wireless keypad with other Bluetooth®-compatible products. For details on pairing with another product, refer to the instructions supplied with the product. To set the keypad to pairing mode, slide the power switch to "ON" while pressing the blue button. Continue pressing the blue button until the keypad is set to pairing mode. When the keypad is in pairing mode, the status indicator, the Caps lock indicator and the touch pad indicator will all flash alternately. If a pass key is requested, enter the numbers specified by the Bluetooth®- compatible product or numbers of your choice (four digits or more) if the product does not specify a pass key. Hints . The keypad is not guaranteed to work with all Bluetooth®-compatible products and may not work properly with some Bluetooth®-compatible products. . A USB cable can be used to pair the keypad and the PS3™ system only. . When the keypad is paired with another Bluetooth®-compatible product, the pairing with the original product will be cleared. To use the keypad with the original product, you will need to pair the devices again. When disposing of the wireless keypad When disposing of the wireless keypad, remove the battery and follow local regulations regarding disposing of batteries. Notice Other than when disposing of the keypad, never remove the screws and never remove the battery from the keypad. 1 Using a crosshead screwdriver, remove the screws from the keypad rear (8 places) and carefully remove the casing. 2 Unplug the connector, and then remove the battery. Battery Connector Recycling Lithium-Ion Batteries Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit Caution Do not handle damaged or leaking Lithium-Ion batteries. Charging the wireless keypad To charge the wireless keypad battery, check that the PS3™ system is turned on (power indicator is lit solid green), and then connect the keypad to the system using a USB cable. While charging the battery, the status indicator, the Caps lock indicator and the touch pad indicator will all flash. When charging is complete, these indicators will turn off. Hints . The wireless controller is not charged during the process of charging the keypad. . The battery has a limited life span. Battery charge duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, usage state, environment and other factors. . If the keypad is charged during use, the status indicator will flash. When charging is complete, the status indicator will stop flashing. Entering text You can enter text in the same way as with a standard PC keyboard. To enter an uppercase letter, first press the Shift key. To enter keypad characters that are colored blue or orange, first press the corresponding blue or orange button. To enter an accented letter, first enter the accent and then enter the letter. When the Shift key is pressed, uppercase letters (instead of lowercase letters) can be entered. This character is entered when the orange button is pressed. This character is entered when the blue button is pressed. Hint To continue to enter keypad characters colored blue or orange, you must press the orange or blue button before each character you enter. Commonly used keys Enters a tab Orange button + Turns on caps lock Confirms characters that have been typed but not entered Blue button + Inserts a line break Moves the cursor left and right Blue button + Moves the cursor up and down Inserts a space Displays the message box of the PS3™ system Switches to touch pad mode Displays the Friends list Using touch pad mode When in touch pad mode, the wireless keypad can be used like a mouse. You can use touch pad mode for cursor control in the browser. Move your finger over the area used as a touch pad. When you press the touch pad button, the touch pad indicator will light up and the keypad will switch to touch pad mode. The area that can be used as a touch pad The p...