Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Midway, modell UPRIGHT DEDICATED VIDEO GAME 25" CABINE 16-20044-101

Hersteller: Midway
Dateigröße: 3.94 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

The Coin and Cabinet Switches are shown on the screen without regard for their actual game location. Each switch change should be exactly duplicated by a single indication on the menu screen. The Lamps tests indicate the state of each of the lamps within control panel and overhead linking sign, or “header” (if installed). Press the LOW button to activate all of the lamps simultaneously, or the HIGH button to cycle the lamps in order. The HEADER TOP and HEADER BOT lamp tests have no effect unless a header or leader light is installed on the cabinet. The Analog I/O test displays a value relative to the travel limits of the steering wheel or throttle indicating the current position of each control. Wheel position varies between 0 (full left) and 255 (full right). Throttle position varies between 0 (full back) and 255 (full forward). The Coin Counts display the total number of coins deposited through each mechanism. Insert currency or tokens to perform these tests. Operation 2-13 HARD DRIVE TEST TEST HARD DRIVE TEST SCREEN The Hard Drive Test verifies the functioning of the Hard Disk Drive Assembly. Highlight the test by using the operator control switches to select the option; then press TEST to begin. This screen reports information but does not permit changes. The Hard Drive Test verifies the existence of the data necessary for the game to operate. Each test should return a “passed” result. Other results may indicate a problem with the hard disk drive. There is a single hard disk drive unit in this game. It is partitioned into two virtual drives, C: and D:. The test should report “passed” for both drives for the game to work properly. Press TEST to exit the Hard Drive Test. Operation 2-14 STEREO SOUND TEST STEREO SOUND TEST SCREEN The Stereo Sound Test verifies the operation of the stereo sound hardware and cabinet speakers. Increase the master volume level before beginning this test. Use the operator control switches to select this test and press TEST to activate it. This screen reports information but does not permit changes. Press the TEST button when prompted by on-screen instructions to check each speaker and the game sound hardware. Listen to the audio signals from the speakers listed on the screen. There should be little or no sound coming from other speakers during each test. Use these tests to find crossed connections, incorrect phase, rattles, vibration, distortion, etc. Press the TEST button to exit the Stereo Sound Test. Operation 2-15 MONITOR PATTERNS TEST MONITOR PATTERNS SUB MENU SCREEN NOTE: This game uses a medium resolution monitor. The increased resolution means that more video information is displayed on the screen than with standard resolution monitors. Use of an industrial-grade degaussing coil is recommended before any corrections to monitor adjustments are attempted. The Monitor Patterns routine provides test screens to verify monitor performance or make adjustments. To begin the tests, use the operator control switches to choose Monitor Patterns Menu from the Diagnostics Menu screen and press TEST to activate the sub-menu. Select a test from the sub-menu and press TEST to activate it. Press TEST once again to return to the Monitor Patterns sub menu. Color Bars fills the screen with shades of colors to verify red, green, blue and white level dynamic adjustments. Each color bar should appear sharp, clear, and distinct from bars on either side. There are 31 levels of intensity displayed in each of the color bars. Incorrect adjustment can cause detail to be missing at the top or bottom of a color bar. Set the monitor controls so that the maximum number of levels is visible in every bar. The Color Bars screen helps to adjust the monitor brightness and contrast. Cross Hatch fills the screen with a grid and a series of dots. The grid and the dots should be completely white, with no fringes or parallel images. The lines should be straight and the dots round. Consult the service literature from the manufacturer of the monitor for more detail on these adjustments. The Crosshatch Patterns assist in verifying the monitor convergence, linearity, and dynamic focus. Operation 2-16 MONITOR PATTERNS TEST (continued from previous page) Red, Blue, and Green Color Screen tests fill the screen with 100% of the chosen color at normal intensity. Each screen should be absolutely uniform from top to bottom and side to side. No retrace lines or noise should be visible. The Color Screen tests can verify monitor intensity, black level, blanking and color purity. Color Screens may not hold their uniformity if the monitor degaussing circuit is defective. White, Black, 50% Gray, and 25% Gray Screens fill the screen with black, gray or white at various intensities. The screens should be uniform with no color tints or distortion. No retrace lines or noise should be visible. If any of the tests shows a need for adjustment, use the proper controls on the Video Monitor. Operation 2-17 FORCE FEEDBACK ADJUSTMENTS FORCE F...