Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
The Big Button Pad lets you experience the joy of wireless freedom with the simplicity of a comfortable, one-handed, fun-to-use game controller. The Xbox 360 Big Button Pad features: • Comfortable, ambidextrous, one-handed use. • A big button for trivia and fast response gameplay as well as a four-way directional pad. • The familiar A, B, X, and Y buttons and Xbox Guide button for easy access to the Xbox Dashboard. • Up to four-player simultaneous gameplay (supported on a game-by-game basis). • A high performance, extended range infrared receiver. The Xbox 360 Big Button Pad is for use exclusively with the Xbox 360 video game and entertainment system. For information about using the Big Button Pad with a particular game, see your game manual. 2 A. Disposable Battery Safety 3 ) Set Up Your Big Button Pads 4 ) Using Your Big Button Pads 4 ) Cleaning Your Big Button Pads 5 ) Troubleshooting 5 If You Need More Help 6 ) Disposal of Waste Electrical and Electronic Equipment 6 ) For Customers in the United States 6 ) For Customers in Canada A WARNING Before using this product, read this manual and the Xbox 360 console manuals for important safety and health information. Keep all manuals for future reference. For replacement manuals, go to or call Xbox Customer Support (see "If You Need More Help"). The limited warranty covering this product is contained in the Xbox 360 Warranty manual (Volume 2) and is available online at ox. co m/support. 1 I I english I 2 A DISPOSABLE BATTERY SAFETY Improper use of batteries may result in battery fluid Leakage, overheating, or explosion. Risk of fire if batteries are replaced by an incorrect type. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: • Keep batteries out of reach of children. • Do not heat, open, puncture, mutilate, or dispose of batteries in fire. • Use only alkaline batteries, type AA (LR6). • Do not mix new and old batteries. • Remove the batteries if they are worn out or before storing your Big Button Pad for an extended period of time. • If a battery leaks, remove all batteries, taking care to keep the Leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer's recommendations for cleanup. • Dispose of batteries in accordance with local and national disposal regulations (if any). • Do not short-circuit power supply terminals on batteries. • Do not attempt to recharge non-rechargeable batteries. Insert batteries according to the following instructions (see "Insert Batteries"). Avoid dropping or throwing the Big Button Pad. Avoid spilling fluid over it. Handle with care as it is a sensitive electronic device. Arrange the infrared receiver cable so that people and pets are not likely to trip over or accidentally pull on it as they move around or walk through the area. When the infrared receiver is not in use, you may need to disconnect the cable from the console to keep it out of the reach of children and pets. Do not allow children to play with the receiver cable or wrap the cable around themselves. SET UP YOUR BIG BUTTON PADS Before you can use your Xbox 360 Big Button Pads with your Xbox 360 console, you need to: 1 Insert batteries. The Big Button Pad uses only AA disposable, alkaline batteries. 2 Insert the infrared receiver cable into one of the console's controller ports. Insert Batteries To insert batteries into the Big Button Pad: 1 Remove the battery cover. 2 Insert two new alkaline AA (LR6) batteries as shown on the underside of the battery cover. For best performance, do not use rechargeable batteries. 3 Replace the battery cover. Connect Your Big Button Pads Up to four Big Button Pads can be actively connected to a console at one time. Plug the infrared receiver cable into an open controller port on your Xbox 360 console. Then position the receiver so that all pads have a clear line of sight to the receiver. TiP For best results, place the infrared receiver above or below your TV. To disconnect all Big Button Pads, remove the infrared receiver cable from the console. Turn Your Console on with a Big Button Pad To turn on your console with a Big Button Pad, point any Big Button Pad at the infrared receiver and press and hold the Xbox Guide button or the Start button. Turn Your Console off with a Big Button Pad To turn your console off, point any Big Button Pad at the infrared receiver and press and hold the Xbox Guide button for three seconds. NOTES • When you turn off your console, as long as the infrared receiver cable is still connected, your Big Button Pads will work the next time you turn the console on. • Big Button Pads work within a 10-15 ...
Dieses Handbuch ist für folgende Modelle:Video Konsolen - Big Button Pad (1021.55 kb)