Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Installation and data exchange using the GoPal® Assistant is described in the following chapter. The manual transfer of software components from the CD/DVD to your mobile navigation device is carried out in Windows Explorer on your PC. You can select one of the following two methods when exchanging data between your navigation system and your PC: ¦ If you have installed the Microsoft ActiveSync® software from the CD/DVD, you can directly connect your navigation device via the USB cable supplied to a USB port on your PC in order to synchronise the data you require. This will give you direct access to your navigation device’s internal flash memory. ¦ If your PC has a card reader, you can insert the external memory card supplied directly into this and manually transfer the data into File Explorer. In this case you don’t have direct access to your navigation device’s internal flash memory. - 12 - 2.1 Initial Operation Depending on the version of your navigation system, the software needed to operate it may not be preinstalled on your navigation device but may be on the enclosed memory card instead. You will find the relevant comment in the README file and on the packaging of your navigation device. In this case, you will have to install the software in order to operate your navigation system. Proceed as follows to carry out the installation: 1. Remove the memory card carefully from its packaging. Please take care not to touch the contacts or to get them dirty, otherwise it may no longer be possible to transfer the data. 2. Insert the memory card into your navigation device’s MMC/SD card slot until you hear it click into place. 3. Turn on the navigation device by pressing its on/off button(see the technical manual). The software components required will now be installed automatically. If you turn on your navigation device before the enclosed memory card has been inserted, the navigation system will display the following screen. Insert the memory card into your device and select the button in order to initiate the automatic installation. Once the installation has finished, the start screen of your navigation system will appear and you will be able to access the various functions such as the navigation and the MP3 player, etc. - 13 - 2.2 Software Reinstallation and Update If necessary, you can remove all or some of the application data, such as the navigation software and the card material, from the memory of your navigation device (see also the technical manual). This is necessary, for instance, in order to install an updated version of the GoPal® Navigator software which you may purchase at a later point in time. The softw...