Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Nextar Dateigröße: 676.39 kb Dateiname: Unterrichtssprache:

3. Clean the area where you wish to position the bracket thoroughly with a good quality glass cleaner. This allows a more secure seal on the windscreen. Place the suction cup and bracket on the windscreen and press down the locking lever to secure the bracket. 17 Using The Windshield Mounting Bracket To mount to dashboard, use the included adhesive disk. Choose a clean, dry spot on your dashboard, peel off protection liner from the back of the disk, and then attach the disk to your dashboard. 4. Rotate the bracket adjuster to adjust the angle of the bracket so that you can view the GPS unit display and operate the controls safely. Warning: When you mount the device in your vehicle, ensure it has a clear line of sight to the sky. The device must not be mounted so that it impairs the driver’s view of the road. Please take extra precaution to ensure the airbags are not obstructed by the device. 18 General Setup System Main Menu In the main menu, there are four items for selecting. Touch the corresponding item to enter. Tap to enter the Navigator. Tap to enter the MP3 Player. Tap to enter the Photo Viewer. Tap to enter the Setup menu. 19 General Setup Setup Menu In the main menu, tap to enter the Setup menu, the screen will display as below: In the Setup menu, tap to return to the main menu. 20 General Setup Language Tap in the Setup menu to enter Language setting menu for language selection, as shown below: Tap the , buttons to select language. Then tap to confirm or tap to cancel. 21 General Setup Date & Time Tap in the Setup menu to enter Date & Time setting menu for changing to the current time zone, date and time, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date. Tap the buttons of Time group to change the corresponding time. Then tap to confirm or tap to cancel. 22 General Setup Brightness Tap in the Setup menu to enter Brightness setting menu for backlight adjustment, as shown below: Tap , to darken or increase the brightness of the display. Energy Saver: You can set the energy saver ON or OFF to determine how the backlight will behave when the screen has not been touched for 5 minutes. OFF: The screen will always be in normal brightness. ON: When running on battery, dim the screen if it is inactive for 5 minutes. You can tap the screen to light it up again. This helps to maintain a longer battery life. Note: Default is set to OFF. After setting, tap to confirm or tap to cancel. 23 General Setup Volume Tap in the Setup menu to enter Volume settings menu for volume adjustment, as shown below: Tap the to decrease the volume. Tap the to increase the volume. Then tap to confirm or tap to cancel. 24 General Setup Align Screen Tap in the Setup menu to align the screen, as shown below. Tap the center of the cross with your finger. When the cross moves to another position, tap and hold the center of the new target. Repeat each time to complete the calibration process. When tapping the screen on the final step, the new settings will be stored and you are returned to the Display menu. 25 General Setup Power Tap in the Setup menu to enter Power menu, as shown below: The Power menu displays the unit’s battery status. The values are between 0% and 100%, where 0% means the battery power has run out completely, and 100% represents a full battery power. When the battery is being charged, the Battery Status will indicate “Charging”. 26 Playing Music The unit is designed with an SD card slot and supports MP3 and WMA format music files. To use the music player, you will need to have an SD card with your MP3 music files preloaded and then insert the card into the slot on the side of the unit. Please note that you cannot use the navigation function of the device at the same time you are using the music player. Warning: For your own safety, do not use the earphones when driving. To Load Your Music • First load your MP3 or WMA formatted music onto your personal SD card. Music files can be imported to your SD card on a PC, using a variety of programs such as Windows Media Player. This process must be performed independent of the navigation unit. • Insert your SD card into the side of the GPS unit. Do not attempt to use the unit to read and burn music files from an external source. Playing Music Tap in the system main menu to enter the Music Player, as shown below: 27 Playing Music Tap button to enter the music play list menu, as shown below: When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page. Tap toggle buttons to determine whether the player will repeat the songs in the play list or not. / 28 Playing Music Tap / toggle buttons to determine whether or not to play the songs in the list randomly. Tap to start the playback and return to Music Player, as sh...

Herunterladen

Geben Sie zwei Ziffern: