QTY. DESCRIPTION 25 43910 21 Washer, Flat 3/16" 26 24798 4 Boot Mounting Strap 27 48133 1 Hard top Boot 28 44790 1 Poly Rear Door 29 43790 1 Strap, Tarp 25" 30 44849 4 "S" Hook, #32 31 44850 4 Strap, Tarp (Less Hooks) 32 23540 1 Hitch Plate 33 43866 20 Bolt, Hex 1/4-20 x 5/8" 34 43661 6 Bolt, Hex 1/4-20 x 1" 35 43088 45 Washer, 1/4" STD 36 1509-90 5 Bolt, Hex 1/4-20 x 1-1/4" 37 47189 43 Nut, Hex Nylock 1/4-20 38 47630 4 Screw, Self Tap 5/16-18 x 3/4" 39 23789 2 Door Latch 40 43351 1 Bolt, Hex 1/

Be aware of changing conditions on slopes. 1. Inspect the Mow-N-Vac to make sure all covers (rear door, vinyl boot, elbow, hose adapter (nozzle), hose and deck adapter are properly attached. 2. Check tires for proper inflation (12 - 14 lbs). 3. Check oil and gas in Mow-N-Vac engine. 4. Begin operation at low speed, adjusting forward speed to match grass height and/or moisture condition to prevent clogging. 5. Do not attempt to vacuum up any material other than vegetation found in a normal yard,

See figure 13. HINT: Push in on hex bolts as you tighten to form threads. 23. Connect the hose adapter to the engine housing by fastening three wing nuts to the pre-assembled bolts in the engine housing. See figure 13. 25. Place the hose hanger rod down into the hose hanger bracket on the impeller housing assembly. See figure 15. NYLON WASHERWING NUT5/16" X 3/4" HEX BOLT(SELF TAP) FIGURE 15 FIGURE 13 CLAMPHOSEHOSE ADAPTER(NOZZLE) 29. Assemble the hitch plate to the tractor hitch if: a. Your trac

Assemble a door latch at each end of the cross brace using a 5/16" x 3/4" hex bolt, a nylon washer and a 5/16" Nylock hex nut. Place the nylon washer between the door latch and cross brace. Tighten so that latch is snug but will still rotate. See figure 13. 20. Place a side panel on top of the cart bed flange, inside the lip of the front panel. Fasten the side panel to the front panel using three 1/4" x 5/8" hex bolts and 1/4" Nylock hex nuts. Fasten the side panel to the cart bed flange using t

Do not operate on slopes in excess of 10 degrees. STAY OFF STEEP SLOPES. • Follow the maintenance instructions outlined in this manual. Look for this symbol to point out important safety precautions. It means — Attention!! Become alert!! Your safety is involved. DANGER: This Mow-N-Vac was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This unit is c

Modele no Modelo no 45-0456 44" Lawnsweeper BALAYEUSE A GAZON DE 44 PO. (112 CM) BARREDORA DE CESPED DE 44 PULGADAS (112 CM) FORM NO. 42016 (12/11/08) • Safety • Assembly • Operating • Maintenance • Repair Parts • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de repuesto • Securite • Assemblage • Utilisation • Entretien • Pieces 2 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise

Modelo No. Modele No. 45-03371 30" LAWNSWEEPER BARREDORA DE CESPED DE 76 cm BALAYEUSE DE 76 cm CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de Repuesto ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. • Securit

No. Part No. Qty. Description Ref. No. Part No. Qty. Description 1 48646 1 Hitch Tube, R.H. 42 43661 4 Bolt, Hex 1/4-20 x 1" Lg. 2 48645 1 Hitch Tube, L.H. 43 25102 2 Dust Cover 3 24950 1 End Plate, R.H. 44 48471 2 Tube, Hopper Frame (Rear) 4 24951 1 End Plate, L.H. 45 48467 2 Tube, Upper Hopper Frame (Front) 5 24989 1 Wrapper 46 48728 2 Tube, Lower Hopper Frame (Front) 6 43175 2 Bolt, Hex 1/4-20 x 1/2" Lg. 47 48402 4 Plastic Plug 7 C-9M5732 6 Rivet, Pop 48 48396 1 Hopper Bag 8 23887 1 B