Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
. . . . . . . . . . . . . . . . . . . . .2 Assembly Instructions . . . . . . . . . . . . .4-5 Safety Symbols . . . . . . . . . . . . . . . . . . .2 Operating Instructions . . . . . . . . . . . . . .6 Product Description . . . . . . . . . . . . . . . .2 Maintenance . . . . . . . . . . . . . . . . . . . . .7 Safety Instructions . . . . . . . . . . . . . . .3-4 FOREWORD This Owner’s/Operator’s Manual is designed to familiarize the operator with the various features and component parts of the equipment and to assist with the assembly, operation and maintenance of the product. It is essential that any operator of this product reads and understands the contents of this manual before using the product. Important safety instructions will be identified by the following safety symbol: Failure to comply with the instructions in this manual may result in serious injury or death. For additional assistance, contact any local authorized Tanaka dealer or contact Tanaka USA at 1-888-4826252. MANUAL SAFETY SYMBOLS Throughout this manual and on the product itself, you will find safety alerts and helpful information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to the operator or bystanders. 1111 2 22222 PRODUCT DESCRIPTION 1. Sweeper Belt 2. Gearcase 3. Outer Tube (Shown for reference only) 4. Sweeper Drum - 2 44444 L SAFETY INSTRUCTIONS PRODUCT SAFETY 1. Read and understand this Owner’s/Operator’s Manual before using this product. Be thoroughly familiar with the proper use of this equipment. 2. Make sure the product is correctly assembled and installed prior to use. 3. Never allow children to operate the product. Never allow adults to operate the unit without first reading the Owner’s/Operator’s Manual. 4. Never operate this product without proper guards or other protective safety devices in place. 5. Before each use, inspect the product. Replace damaged parts. Make sure all fasteners are in place and tightened securely. 6. If running problems or excessive vibration occur, stop immediately and inspect the unit for the cause. If the cause cannot be determined, or is beyond your ability to correct, return the product to your servicing dealer for repair. 7. Do not use this product for any job except that for which it is intended. OPERATOR SAFETY 1. Never operate this product when you are tired, ill, or while under the influence of alcohol, drugs or medication. 2. Always wear eye protection that complies with ANSI (American National Standards Institute) Z87-1. 3. Wear hearing protection. 4. Always wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair so it is above shoulder length. 5. To reduce risk of injury associated with inhalation of dust wear a face filter mask in dusty conditions. 6. Always operate with both hands firmly gripping the product. 7. Keep clear of the rotating belts and paddles at all times. 8. Never raise a moving attachment above waist level. 9. Do not put hands or feet near or under rotating parts. Keep clear at all times. 10. To reduce risk of injury associated with contact with a rotating part, stop engine before installing or removing attachments. - 3 OWNER’S MANUAL SAFETY INSTRUCTIONS AWARENESS OF WORK ENVIRONMENT 1. Inspect your work area before you begin. Remove objects such as broken glass, nails, wire and rocks which can become dangerous projectiles if thrown. Remove string, rope or similar materials which can become entangled in the rotating drum. 2. Maintain a firm footing and balance while operating the product. Do not overreach. 3. Keep children, bystanders and animals outside a 50ft. (15m) radius surrounding the area of operation. 4. Use the product only in daylight or adequate artificial lighting. 5. Avoid prolonged operation in very hot or very cold conditions. 6. If contact is made with a hard object, stop the engine and inspect the sweepers and drums for damage. ASSEMBLY INSTRUCTIONS - 4 L INSTALLING THE GEARBOX SWEEPING ATTACHMENT 1. Make sure all the components are included in the box. The box should contain: a. Gearbox (1) b. Drum Assemblies (2) c. Drum Axle (2) d. Clevis Pin (2) e. Hitch Pin (2) f. Cotter Pin (2) g. Shaft Protector (2) h. Gearcase Spacer (1) 2. Slide the rubber sleeve drive shaft protector onto the drive shaft pipe housing. This sleeve will protect the drive shaft pipe from repeated contact with the rubber paddles. The protector can be slid up the drive shaft pipe housing during installation, but should be slid down to rest on top of the gear case before use. 3. Insert the end of the drive shaft housing into the gearcase and push it until it bottoms. The drive shaft tube should go into the gearcase about 1 - 1.5 inches. If the drive shaft housing stops before bottoming, rotate i...