|
Anleitung Zusammenfassung
The Accu becomes warm when using the cylinder mower. This is normal and does not impair its performance. Blockage protection: If the cylinder mower is blocked by a foreign body or the motor is overloaded (red Error-LED lights up), the motor is automatically switched off by the blockage protection (loud rattling). Remove key from socket, remove foreign body or rectify the cause of the overloading and restart the mower after a few seconds. GH Charge display: green LED Accu fully charged yellow LED Accu half- charged red LED Accu flat 9BI 15 GB Switching off the cylinder mower: Adjusting the cutting height: J KK Mowing with the grass collection sack (accessories): Circuit Breaker: If the Cordless Motor Mower is overloaded over a longer period of time the motor may become hot (Red Error-LED flashes).To protect the motor from overheating the circuit breaker switches the motor off. You can switch the mower on again after approximately 5-10 minutes. Discharge protection: The mower switches off automatically as soon as the capacity of the Accu has been exhausted (discharge protection). We recommend recharging the battery straight away. Note: The accu cylinder mower can be operated with the Accu or without as a hand mower. The key prevents the cylinder mower being switched on accidentally. 1. Release starting handle I. 2. Remove the safety key each time you stop work. DANGER! Cutting tool can cause injuries! AV When adjusting the cutting height, remove the key and wear suitable work gloves. The cutting height can be set to any position between 12 mm and 42 mm. 1. Stand behind the cylinder mower with one foot on the roller J. 2. Slacken the two locking screws K and set to the height required on the scale L. 3. Tighten the two locking screws K on both sides to the same height. The locking screws K must always be set to the same height on both sides. The mower may only be adjusted to a depth in which the lower blade does not touch the ground when it is uneven. v Suspend the grass collection sack in the cylinder mower as described in the Operating Instructions. 6. Putting into Storage Storage: 1. Remove safety key. 2. Charge Accu (see 7. Maintenance). 3. Clean mower before storage and connect to the charger (see 7. Maintenance). 4. Store mower in a dry, frostproof but cool place out of reach of children. To save space, the cylinder mower can be folded up by folding the clamping lever. Ensure the cable is not trapped during this process. 16 Disposal: (in accordance with RL2002/96/EC) If the mower is not stored connected constantly to the charger, the Accu must be charged at least every six months because it self-discharges. Self-discharging is reduced at low storage temperatures. If the Accu is completely flat, e.g. due to too long storage without any recharge, it will get its full efficiency again after several charging cycles. The product must not be added to normal household waste. It must be disposed of in line with local environmental regulations. GB Disp...
Dieses Handbuch ist für folgende Modelle:Handrasenmäher - ART 4026 380 AC (196.65 kb)
Handrasenmäher - ART 4026 380 AC (196.65 kb)
Handrasenmäher - ART 4026 380 AC (196.65 kb)
Handrasenmäher - ART 4026 380 AC (196.65 kb)