Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
THE MODEL NUMBER. 2. THE PART NAME. 4. THE NAME OF ITEM. Your Mower is right hand (R.H.) or left hand (L.H.) as you push. Do not use Reference Numbers when ordering Repair Parts, always use Part Numbers. PARTS LIST REF. REF. NO. PART NO. PART NAME NO. PART NO. PART NAME 1 10 Trunnion __________ __ _ _ --------- 34 1652-52 Bearing ___________________ „ ........... 2 2624-18 Spacer ________________________________________ 35 2619-25 Tire _____________________________________________ 3 3603-43 Handle Brace ____________________________ 36 1110-27 Drive Wheel Less Tire ___________________ 4 2643-60 Knob—Wheel Adjust _ ___________________ 37 1538-36 *Nut (%-16 Hex Lock)_____ . . . — 5 3622-54 Cover Plate . ........................ 38 2674-33 Hub Cap ------------------------------------- 6 1523-3 *Screw (#10 x % Ph. Hd. Sht. Mtl.) 39 1650-21 Retaining Ring_______________________________ 7 1689-3 Grass Catcher Clip .................. 40 141 *Washer (% x 1 Vi)___________________________ 8 169 *Bolt (5/16-18 x 2Vi Sq. Hd.) _________ 41 428 Pinion Gear—L.H. __________________________ 9 1509-13 * Bolt (5/16-18 x 2Va Hex Hd.) ________ 42 109 Felt Washer _____________________________________ 10 70 *Nut (5/16-18 Hex) ________________________ 43 323 Pawl _______________________________________________ 11 2117-15 Handle Shaft _________________________________ 44 2118-81 Gear Housing Ass'y—L.H. _____________ 12 67 *Nut (’/4-20 Hex) ______________________________ 45 52 *Nut (%-24 Semi-Fin. Hex) _______________ 13 1664-7 Cross Handle _________________________________ 46 11 Trunnion _________________________________- 14 165 *Bolt (Vi-20 x 1% Carriage) ____________ 47 451 Screw-Cutter Bar Adjust _____________ 15 1616-114 Label—Wheel Adjust _____________________ 48 453 Screw—Rear ____________________________________ 16 2616-215 Label ______________________________________________ 49 455 Screw—Pivot (R.H. Thd.) ________________ 17 1112-29 Spacer Tube Ass'y_________________________ 50 2134-14 Cutter Bar ______________________________________ 18 41-028 *Nut (5/16-24 Hex Lock) _________________ 51 1643-23 Roller Adjust Knob _________________________ 19 1605-663 Name Plate ___________________________________ 52 /^iW-ôOl Roller Bracket—L.H............... ... 20 1530-6 *Rivet (3/16 x % Rd. Hd.)________________ 53, Roller Bracket—R.H.___________________— 21 1629-28 Retainer ___________________________________________ 54 1529-45 Roller Adjust Bolt ________________________ 22 104 Felt Washer ___________________ _______ 55 757 *Washer (5/16 x %)------------------------ 23 106 Felt Retainer ________________________________ 56 2658-31 Roller _________________________________________________ 24 3 Bearing _________________________________________ 57 3111-128 Ass'y-End Plate (R.H.) __________________ 25 1657-19 Bushing __________________________________________ 58 1155-47 Spring & Trunnion Ass'y_________________ 26 1509-38 Screw (#10-32 x % Hex Hd.) -------- 59 2118-82 Gear Housing Ass'y—R.H. _________________ 27 1540-55 Washer _____ _________________________________ 60 425 Pinion Gear—R.H. ________________________ 28 1129-233 End Plate with Trunnions—L.H. .... 61 1622-50 Dust Cover .. ..........-........... 29 2135-17 Reel Ass'y __________________________________ 62 1108-80 Drive Wheel Ass'y with Tire _______ 30 1530-20 * Rivet (3/16 x 13/32 Rd. Hd.) ________ 63 2616-558 Label—Handle Cover____________________ 31 1629-74 Retainer _______________________________________ 64 1540-43 Washer ____________________________________________ 32 1509-86 Screw-Cutter Bar (L.H. Thd.) ------- 65 1534-8 Nut (10-32 Gripco) _________________________ 33 1631-45 Axle _____________________________________________ For Illustration—See Page 2 *Standard Hardware Item—Purchase Locally SETTING UP 1. Attach handle brace (1). (Fig. 1) 2. Attach handle brace spacer and handle as shown, tighten nuts (2) securely. 3. Attach cover plate and grass catcher clip with screws (3). 4. If grass catcher is used, attach catcher hooks on inside of frame, under HEAD of roller bracket bolt, as shown in Fig. 1. CUTTING HEIGHT ADJUSTMENT Locate wheel levers and roller knobs in positions shown on chart (attached to back of handle cover plate) for cutting height desired. To make these adjustments with maximum ease, proceed as follows: TO ADJUST WHEELS 1. Tilt mower back on roller to raise wheels slightly off the ground. 2. Press levers toward outside of mower to "unlock" them from present position, and move to new position. Be sure both levers are in same position and trunnions are firmly seated in holes in chassis end plates. TO ADJUST ROLLER 1. Tilt mower forward to raise roller slightly off the ground. 2. Loosen roller knobs 2 full turns and move to new position. Be sure both knobs are in same position and firmly seated in "notch" in chassis end plate, then tighten securely. PLACE WHEEL LEVER AND ROLLER KNOB IN POSITION SHOWN FOR ...