Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
No. Description 7063344 Vacuum Hose Kit, Leaf Blower Simplicity MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA © Copyright 2004 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. Rev. 04/2004 TP 400-4084-00-AT-SMA Illustrated Parts List NOTE: Unless noted otherwise, 74\63344kit use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7063344 - Vacuum Hose Kit © Copyright 2004 Simplicity Manufacturing, inc. All Rights Reserved 1 TP 400-4084-00-AT-SMA Illustrated Parts List REF NO PART NO. QTY. DESCRIPTION 1 7023645 2 PIN, 3/16 x 1-1/2 Clevis 2 7072434 1 ROD, Hose/Handle Holder 3 7072435 1 BRACKET, Upper Hose Clamp 4 7072436 1 HOSE, 8 inch Diameter x 8 feet Long 5 7075893 1 DECAL, Personal Protection 6 7075957 1 BRACKET, Inlet Shutoff 7 7075958 1 BRACKET, Lower Hose Clamp 8 7075959 1 BRACKET, Hose Clamp Support 9 7076978 5 NUT, 1/4-20 Hex Nyloc 10 7091310 2 HAIR PIN, #13 11 7091776 4 CARRIAGE BOLT, 1/4-20 x 3/4, GR5 12 7091814 1 CAPSCREW, 1/4-20 x 1-1/4 Hex Head 13 1023100 1 COUPLER, Hose (Plastic) 14 1024100 1 RING, Shut Off (Plastic) 15 1026100 1 HANDLE 16 1028100 1 GRIP, Handle (Black Vinyl) 17 1030100 1 NOZZLE, Vacuum (Plastic) Footnotes The above parts group applies to the following Mfg. Nos.: 7063344 - Vacuum Hose Kit © Copyright 2004 Simplicity Manufacturing, inc. All Rights Reserved 2 TP 400-4084-00-AT-SMA Hardware Identification Lockwasher Hex Nut Common Hardware Types Hex Head Capscrew (P (((■ Carriage Bolt Standard Hardware Sizing When a washer or nut is identified as 1/2”, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. i\5 3 Screw, 1/2 x 2 Body Diameter & Torque Specifications Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 O SAE Grade 5 © SAE Grade 8 Size Of Hardware in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut 7/16” Bolt or Nut 1/2” Bolt or Nut Wrench—9/16” Wrench (Bolt)—5/8” Wrench—3/4” Wrench (Nut)—11/16”...