Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
For answers to your questions about this product: Call 7 am-7 pm, Mon.-Sat., or 10 am-7 pm, Sun. 1-800-235-5878 <,oo,8 listed are Central Time) Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 530163553 8/26/02 Warranty Statement 2 Service & Adjustments 10 Safety Rules 2 Storage 10 Assembly 6 Parts List 11 Operation 7 Spanish 12 Maintenance 9 Parts and Ordering Back Cover FULL ONE YEAR WARRANTY ON CRAFTSMAN L_LAWN EDGER ATTACHMENT For one year from the date of purchase, when this Craftsman Lawn Edger Attachment is maintained and lubricated according to the operating and maintenance instructions in this manual, Sears will repair, free of charge, any defect in materials or workmanship. This warranty excludes expendable parts that become worn during normal use. If this Lawn Edger Attachment is used for commercial purposes, this warranty applies for only 90 days from the date of purchase. If this Lawn Edger Attachment is used for rental purposes, this warranty applies for only 30 days from the date of purchase. This warranty applies only while this product is in use in the United States. WARRANTY SERVICE IS AVAILABLE BY RETURNINGTHE CRAFTSMANLAWN EDGER ATTACHMENTTOTHENEARESTSEARSSTORE ORSERVICECENTERINTHEUNITED STATES. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179 41_WARNING: When using garden ing appliances, basic safety precautions must always be followed to reduce the risk of fire and serious injury. Read and follow all instructions. This power unit can be dangeroust Operator is responsible for following instructions and warnings on unit and in manual, Read entire instruction manual before using unit! Be thoroughly familiar with the controls and the proper use of the unit, Restrict the use of this unit to persons who have read, understand and will follow the instructions and warnings on the unit and in the manual, Never allow children to operate this unit. INFORMATION ON THE UNIT OPERATOR SAFETY DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA. Do not attempt to clear away cut ma terial or hold material to be cut when the blade is in motion. Make sure powerhead is stopped and spark plug wire is disconnected (or powerhead is disconnected from power source) when removing jammed material from the cutting blade, Do not grab or hold attachment by the cutting blade. • Dress properly, Always wear safety glasses or similar eye protection when operating, or performing maintenance on your unit (safety glasses are available). Eye protection should be marked Z87, • Always wear face or dust mask if operation is dusty, • Always wear heavy, long pants, long sleeves, boots, and gloves. • Always wear foot protection. Do not go barefoot or wear sandals. • Secure hair above shoulder length Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts. • Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning blade, • Stay alert. Do not operate when you are tired, ill, upset, or under the influ2 ence of alcohol, drugs, or medication. with the suffix "W-A" (in Canada, "W"). Watch what you are doing; use com-Make sure your extension cord is in mon sense. good condition. Inspect extension • Wear hearing protection. cord before use and replace if dam• Never start or run inside a closed room or building. Breathing exhaust fumes can kill. • Keep handles free of oil and fuel. • Only operate unit with handlebarinstalled. • Keep hands and feet away from cutting area. • Never direct discharge of material toward bystanders nor allow anyone near the area of operation. Use care in directing discharge to avoid glass enclosures, automobiles, and the like. FUEL SAFETY (for gas powerheade) • Mix and pour fuel outdoors. • Keep away from sparks or flames. • Use a container approved for fuel. • Do not smoke or allow smoking near fuel or the powerhead. • Avoid spilling fuel or oil. Wipe up all fuel spills before starting the power- head. • Move at least 10 feet (3 meters) away from fueling site before starting power- head engine. • Stop engine and allow to cool before removing fuel cap. • Remove fuel cap slowly. ELECTRICAL SAFETY (for electric powerheade) _I!_WARNING: Avoid a dangerous environment. To reduce the risk of electrical shock, do not use in rain, in damp or wet locations, or around swimming pools, hot tubs, etc, Do not expose to snow, rain, or water to avoid the possibility of electrical shock, Do not handle extension cord plug or unit with wet hands. • Use only a voltage supply as shown on the nameplate of the unit. • Avoid dangerous situations. Do not use in presence of flammable liquids or gases to avoid creating a fire or explosion and/or causing damage to unit, • Avoid dangerous environments. Do not use in unventilated areas or where dust or explosive vapors can bui...