Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Poulan Dateigröße: 727.42 kb Dateiname: Unterrichtssprache:

They have com pe tent, well trained tech ni cians and the prop er tools to service or repair this unit. Please read and retain this manual.The in struc tions will enable you to assemble and main tain your Grass Catch er properly. Always observe the "SAFETY RULES". TABLE OF CONTENTS SAFETY RULES ................................................................... 2-3 CUSTOMER RESPONSIBILITIES......................................... 12 BAG OF PARTS .................................................................... 4-5 STORAGE .............................................................................. 12 ASSEMBLY..............................................................................6 PREPARATION......................................................................13 OPERATION .......................................................................... 11 REPAIR PARTS................................................................. 14-15 3 KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. 00155 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields be fore starting your trac tor and while mow ing. We recommend wide vision safety mask for over the spec tacles or stan dard safety glasses. UNPACKING INSTRUCTIONS CARTON CONTENTS: • Remove all parts and packing materials from carton. (2) Container Tops (1) Mounting Bracket • Foldflaps to inside of carton and turn carton upsidedown (2) Container Bottoms (1) Cover Assembly on floor of work area. To protect grass catcher cover (1) Upper Chute (1) Cover Seal during assembly place cover upsidedown on overturned carton. (1) Lower Chute (1) Bag of Parts • Check carton contents against list. Be sure all parts (1) Support Post (1) Owner's Manual are there. (2) Wheel Weights NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the assembly instructions will identify the group needed for that step. GROUP "A" GROUP "B" ASSEMBLY LOCATION HARDWARE SHOWN ACTUAL SIZE BAG OF PARTS CONTENTS (4) Shoulder Bolt, Self-Tapping (3) Carriage Bolt 5/16 - 18 x 3/4 (3) Locknut 5/16-18 (2) Bolt 5/16 - 18 x 1 (2) Locknut 5/16-18 (2) Nut, Acorn 5/16-18 (1) Bracket Support Pin (1) Retainer Spring (3) Tubing End Caps LATCH HOOK ATTACHMENT TO MOWER DECK REAR MOUNTING BRACKET TO DRAW BAR GROUP "C" GROUP "D" SUPPORT POST TO CORNER SUPPORT SUPPORT POST TO MOUNTING BRACKET 4 BAG OF PARTS CONTENTS (continued) GROUP "F" GROUP "E" CHUTE LATCH ASSEMBLY to UPPER CHUTE (1) Screw #10 x 1-1/8 (2) Washer 3/16 x 3/4 x 16 Ga. (1) Nut, Acorn #10 (1) Spacer, Split #10 (1) Rubber Latch LOWER CHUTE ASSEMBLY TO MOWER DECK GROUP "G" CHUTE LATCH ASSEMBLY to LOWER CHUTE GROUP "H" (2) "U" Bolt (4 ) Locknut **ITEMS NOT SHOWN FULL SIZE** WHEEL WEIGHTS TO FRONT WHEELS (2) Nut, Weld #10 (2) Washer, Lock #10 (2) Washer 3/16 x 3/4 x 16 Ga. (2) Screw #10 x 5/8 (2) Latch Hook Assembly (1) Nut, Weld #10 (1) Washer, Lock #10 (1) Washer 3/16 x 3/4 x 16 Ga. (1) Screw #10 x 5/8 5 ASSEMBLY BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER Some mower models may need minor modifications before you can mount the grass catcher to the unit. Look carefully at the mower deck on your unit and compare the deck mandrel to the illustrations below. If your mower deck mandrel looks like STYLE "A", your unit is ready - proceed with the grass catcher assembly. If your mower deck mandrel looks like STYLE "B", go to the PREPARATION section in this manual. DECK MANDREL DECK MANDREL STYLE "A" STYLE "B" PARTS IDENTIFICATION COVER WARNINGDonotoperatemowerunlesscontainerisproperlyissubjecttowearanddetierioration.Checkbagfrequently.Replacewhencrackedordamaged.Useonlyarecommendedreplacementcontainer. WARNINGDonotoperatemowerunlesscontainerisproperlyissubjecttowearanddetierioration.Checkbagfrequently.Replacewhencrackedordamaged.Useonlyarecommendedreplacementcontainer. 02084UPPER CHUTE CHUTE LATCH LOWER CHUTE ATTACHING STRAPSLOWER CHUTE CONTAINERS FULL BAG INDICATOR WHEEL WEIGHT U-BOLT GRASS CATCHER NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position. (1) 3/8" Wrench (1) Drive Ratchet (1) 1/2" Socket (1) 3" or longer Extension THESE ARE THE TOOLS YOU WILL NEED TO AS (1) 9/16" Socket (1) Short Handle SEMBLE YOUR GRASS CATCHER: Phillips Screwdriver CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift/motion control lever in neutral (N) po...

Herunterladen

Geben Sie zwei Ziffern: