Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Craftsman Dateigröße: 442.48 kb Dateiname: Unterrichtssprache:

CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation. STEP 1 : (SEE FIGURE 1) • Remove tractor hood. (Refer to tractor manual.) • Remove an (LT) Lawn Tractor heat shield like the one shown. Remove a (GT) Garden Tractor heat shield like the one shown only if you need access to inside of tractor frame during step 2. iMPORTANT: Be sure to re-attach the heat shield after bumper is installed. (LT) LAWN TRACTOR -1 REMOVE THIS STYLE HEAT SHIELD (GT) GARDEN TRACTOR REMOVETHIS HEAT SHIELD ONLY IF MUFFLER MUST BE IN STEP 2 • Remove any bolts present in front mounting holes in side of tractor frame. If bolt will not screw out of hole, check if a nut is present on bolt on inside of frame. On GT tractors, if access to nut is blocked by a front mounted muffler, slide muffler down exhaust tubes to rest on top of browning shield. iMPORTANT: Be sure to re-attach muffler and heat shield after bumper is installed. • If rear mounting holes in tractor frame are empty, install hex bolts (C) and hex nuts (D) supplied in parts bag. See figure 2. (LT) LAWN TRACTOR REMOVE BOLT INSTALL(C), (D)IF =_ii_ HOLE IS EMPTY I-_-_--_ IF PRESENT \ SUSPENSION BRACKET (LT) LAWN TRACTOR REMOVE BOLT INSTALL (C), (D) IF HOLE IS EMPTY SUSPENSION BRACKET (GT) GARDEN TRACTOR EXHAUST TUBES BROWNING SHIELD J REMOVE BOLT SUSPENSION BRACKET IF PRESENT FIGURE 1 FIGURE 2 STEP 3: (SEE FIGURE 3) * Place plug (E) on a work bench or solid table and push end of bumper down onto plug. Repeat for second plug. See figure 1. BUMPER PUSH DOWN WITH EVEN PRESSURE WORK BENCH SHORT STEP OR SOLID TABLE _PLUG (E) FIGURE 3 STEP 4: (SEE FIGURE 4) * Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. * The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for hood to stay in raised position when opened. Attach the bumper using either standard hex bolts (B) and hex nuts (D) or self threading bolts (A) and lock washers (F). Use the self threading bolts (A) if standard hex bolts (B) do not insert freely into the hole in the tractor frame. iMPORTANT: Before fully tightening bolts, be sure tractor hood will stay in raised position when opened. LAWN TRACTOR (LT) SHOWN GARDEN TRACTOR (GT) IS SIMILAR HEX_IUT(D) BR BOLT (B) (F BR BOLT (A) BOLT (A)_B) FIGURE 4 OTES OTES Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Call anytime, day or night (U.S.A. only) To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada) Para pedir servicio de reparacidn Au Canada pour service en frangais: a domicilio, y para ordenar piezas: 1-800-LE-FOYER Mc 1-888-SU-HOGAR ® (1-800-533-6937) (1-888-784-6427) Se /ir-8 TM SM ® Registered Trademark / Trademark / Service Mark of Sears Brands, LLC TM SM ® Marca Registrada / Marca de F_brica / Marca de Servicio de Sears Brands, LLC MCMarque de commerce / MD Marque d6pos6e de Sears Brands, LLC ® Sears Brands, LLC ...

Herunterladen

Geben Sie zwei Ziffern: