Troubleshooting and support If... Try one or more of the following Cannot copy pictures from one device to another even though the copy destination is not full. Storage devices that have FAT (File Allocation Table) 16 formatting can only store up to 512 files in its top level folder (root directory). To make sure all your pictures copy properly, format the copy destination to FAT32 before copying to it: Caution: Formatting deletes all pictures and videos, including protected files. 1 Connect the device to your computer. 2 Open My Computer and locate the device. 3 Right-click on it and choose Format. 4 From the File system drop-down menu, choose FAT32 then click Start. Screen messages Screen message Try one or more of the following Create file failed. The device (memory card, USB drive, camera, etc.) you are trying to copy to is protected. ¦ See your device documentation to remove write protection. ¦ Insert or connect a different device. Printer unavailable. Unable to connect to printer. ¦ Make sure your printer is on and the USB cable is securely connected (see page 39). ¦ Make sure you changed your USB connection mode from computer to printer (see page 40). Printing error. ¦ Make sure your printer is on and the USB cable is securely connected (see page 39). ¦ Check your printer for more info. Time out occurred while printing. ¦ Check cables and printer supplies. Print again. Troubleshooting and support Screen message Try one or more of the following Write failed. Select another location. The frame was unable to copy the picture. ¦ Insert a different card or device (see page 28). Unable to create file. Device write protected or full. The frame was unable to copy the picture. ¦ Insert a different card or device (see page 28). ¦ Remove write protection, unlock card. ¦ Delete pictures from card. Disk full. Error attempting to open file or directory. ¦ Turn off the frame, then turn it back on. Press and hold the power button (for about 2 seconds), then release. If the problem persists, contact customer support help, at Error duplicate filename. Error occurred while closing a file. Error invalid filename Error reading from file. Error writing from file. Error writing a file. Error writing to a file. File Copy Failed! Internal error. Parameter is invalid. Unknown error. 9 9 Appendix Digital frame specifications For more specifications, visit KODAK EASYSHARE W820/W1020 Wireless Digital Frames Color display W820 20.3 cm (8 in.) diagonal digital LCD, 800 x 480 pixels, 4:3 or 16:9 aspect ratio, 17.6 x 10 cm (6.9 x 3.9 in.) viewable area W1020 25.4 cm (10 in.) diagonal digital LCD, 800 x 480 pixels, 16:9 aspect ratio, 23.5 x 14.6 cm (9.3 x 5.8 in.) viewable area Internal storage capacity W820, W1020 512 MB Power Leader Electronics Inc. AC adapter, model MU18-21...

Dieses Handbuch ist für folgende Modelle:
Bilderrahmen - W820 (3.9 mb)