Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Precautions for flash use . When using a built-in camera flash, make sure to remove the lens hood and shoot from at least 1m (3.3 feet) away from your subject. With certain of lens/ flash combinations, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. Vignetting . When you use lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. . Names of parts 1…Focusing ring 2…Zoom ring 3…Focal-length scale 4…Focal-length index 5…Lens contacts 6…Focusing mode switch 7…Mounting index . Attaching/detaching the lens To attach the lens (See illustration .–..) 1 Remove the rear and front lens caps and the camera body cap. . You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). . If a packaging lid is attached, remove it as shown in (3). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. . Do not press the lens release button on the camera when mounting the lens. . Do not mount the lens at an angle. To remove the lens (See illustration .–..) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Attaching lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. . A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You can use the ALC-SH108 (sold separately). . When using a built-in camera flash, make sure to remove the lens hood to avoid blockage of the flash light. . When storing, turn over the lens hood and place it onto the lens backwards. . Zooming Rotate the zooming ring to the desired focal length. .... Specifications ... (..) 35mm. ......*1 (mm) ... ... ..*1 .. ....*2 (m) ...... (.) .... ...... (mm) ....(.... ..)(.:mm) ..(.:g) Name (Model name) Equivalent 35mmformat focal length*1 (mm) Lens groupselements Angle of view*1 Minimum focus*2 (m (feet)) Maximum magnification (X) Minimum f-stop Filter diameter (mm) Dimensions (maximum diameter . height) (approx., mm (in.)) Mass (approx., g (oz.)) DT 18-55mm F3.5-5.6 SAM (SAL1855) 27-82.5 7-8 76°-29° 0.25 (0.82) 0.34 f/22-36 55 69.5.69 (2 3/4 . 2 3/4) 210 (7 4/8) DT 55-200mm F4-5.6 SAM (SAL55200-2) 82.5-300 9-13 29°-8° 0.95 (3.2) 0.29 f/32-45 55 71.5.85 (2 7/8 . 3 3/8) 305 (10 3/4) *1 ....35mm...............APS-C................................... *2 ................................ . .................................. ......(ADI..).ADI...................... .. . ............................................................... ... DT 18-55mm F3.5-5.6 SAM:...(1)............(1).............
Dieses Handbuch ist für folgende Modelle:Kameras - SAL55200-2 (2.24 mb)