Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Camera buttons and controls do not function In Review, a blue or ¦ Transfer all pictures to the computer (see page 32). black screen is ¦ Take another picture. displayed instead of a picture Pictures remaining ¦ Continue taking pictures. The camera is operating normally. number does not (The camera estimates the number of pictures remaining after each decrease after taking a picture is taken, based on picture size and content.) picture Flash does not fire ¦ Check the flash setting, and change as needed (see page 7). NOTE: The flash does not fire in all modes. Memory card is almost ¦ Transfer the pictures to the computer (see page 32). or entirely full ¦ Delete pictures from the card (see page 15) or insert a new card. The battery does not ¦ See page 2 or visit charge using USB ¦ Insert a new battery (see page 1). charging Battery life is short ¦ Make sure the correct battery type is installed (see page 50). ¦ Wipe the contacts with a clean, dry cloth before inserting a battery in the camera. ¦ Insert a new or charged battery (see page 1). Getting help Status Solution You cannot take a ¦ Turn the camera off, then on again. picture ¦ Depress the Shutter button all the way (see page 5). ¦ Insert a new or charged battery (see page 1). ¦ Memory is full. Transfer pictures to the computer (see page 32), delete pictures (see page 15), or insert another card. Memory card not ¦ Card may be corrupted. Format the card in the camera (see recognized or camera page 31). freezes with card ¦ Use another memory card. Only SD or SDHC Cards are supported. Cannot find the ¦ To view pictures on a card or in internal memory, see page 14. desired picture/video Computer/connectivity problems Status Solution Pictures do not ¦ See Help in EASYSHARE Software. transfer to computer Slide Show does not ¦ Adjust the camera Video Out setting to NTSC or PAL (see run on an external page 30). video device ¦ Make sure the external device settings are correct. (See the device’s user’s guide). Computer does not ¦ Make sure the battery is charged and installed correctly (see communicate with page 1). the camera ¦ Turn on the camera. ¦ Make sure the USB cable model U-8 is connected to the camera and the computer (see page 33). ¦ Make sure EASYSHARE Software is installed (see page 32). Getting help Picture quality problems Status Solution Picture is not clear ¦ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. ¦ Clean the lens (see page 48). ¦ Place the camera on a flat, steady surface or use a tripod (especially in high-zoom settings or in low light). Picture is too dark ¦ Reposition the camera for more available light. ¦ Use Fill flash (see page 7) or change your position so light is not behind the subject. ¦ Move so that the distance between you and the subject is within the effective flash range. (See camera specifications starting on page 46.) ¦ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. Picture is too light ¦ Reposition the camera to reduce the amount of available light. ¦ Turn the flash off (see page 7). ¦ Move so that the distance between you and the subject is within the effective flash range. (See camera specifications starting on page 46.) ¦ To automatically set exposure and focus, press the Shutter button halfway. When the framing marks turn green, press the Shutter button completely down to take the picture. ¦ In Program and Panorama modes, adjust the Exposure Compensation (see page 25). Getting help Direct printing (PICTBRIDGE enabled Printer) problems Status Solution Cannot find the desired picture ¦ Use the Direct printing menu to change the image storage location (see page 34). The Direct printing menu interface ¦ Press any camera button to redisplay the menu. turns off Cannot print ¦ Make sure there is a connection between the camera and the printer pictures (see page 34). ¦ Make sure the printer and the camera have power. Camera or printer ¦ Follow the prompts to resolve the issue. display an error message 7 7 Appendix Camera specifications CCD—1/2.33-type Effective pixels—12.4 MP, 4096 x 3016 LCD—7.6 cm (3.0 in.) LCD; 230K pixels Image storage—Optional SD/SDHC Card (The SD logo is a trademark of the SD Card Association.) Maximum supported card size: 32 GB Internal storage capacity—32 MB internal memory (17 MB available for image storage. 1 MB equals one million bytes.) Taking lens—5X optical zoom; f/3.0–f/4.8; 35 mm equivalent: 35–175 mm Lens protection—Built-in Digital zoom—5X continuous Focus system—TTL-AF (through-the-lens auto focus); Auto: Multi-Zone, Center-Zone. Working range: 60 cm (23.6 in.)–infinity @ wide, normal 90 cm (35.4 in.)–infinity @ tel...