Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
3 Plug the AC adapter into the round power connector on the back of the Camera Dock and into a power outlet. Your AC adapter may be different from the one pictured or may have additional plugs. Use the plug that accommodates your type of power outlet. Leave the Camera Dock connected to the computer for easy access for transferring pictures and charging the Battery Pack. IMPORTANT: Use only the AC adapter, 7-Volt included with the Camera Dock. Other adapters may cause damage to your camera, Camera Dock, or computer. DC IN3V 1 2 3 Chapter 8 Installing the Battery Pack in the Camera 1 Open the battery door on the bottom of the camera. 2 Install the Battery Pack as illustrated. CAUTION: The Battery Pack can only be inserted into the camera in the orientation shown. If the Battery Pack does not easily install, reposition it and try again. DO NOT FORCE IT. Doing so can damage your camera. 3 Close the battery door. IMPORTANT: The Battery Pack is not charged when you receive it. See page 56 for charging instructions. 55 Chapter 8 Docking the Camera When you are ready to transfer your pictures from the camera to the computer, or charge the Battery Pack, place the camera in the Camera Dock. 1 Turn off the camera. 2 On the camera bottom, slide the connector cover open. 3 Place the camera in the Camera Dock and push down to seat the connectors. The Power/Transfer light glows green when the camera is properly seated. The camera is now powered by the Camera Dock instead of the camera batteries. NOTE: If the KODAK EASYSHARE Ni-MH Rechargeable Battery Pack is in the camera, the Camera Dock immediately begins charging (see page 56). Connector cover Power/Transfer light Connector 56 Chapter 8 Charging the Battery Pack The Battery Pack is not charged when you receive it. 1 Turn off the camera. 2 Make sure the Battery Pack is installed in the camera (see page 54). 3 Place the camera in the Camera Dock (see page 55). Charging begins immediately. The three green charging lights monitor the charging status: Full charging takes about 2.5 hours. After the Battery Pack is fully charged, leave the camera in the Camera Dock to maintain the full charge. Charging stops if you turn on the camera. If the camera is left in the Camera Dock with the power on, charging resumes when the camera enters Auto Power-off (see page 86). NOTE: The Camera Dock only charges the provided KODAK EASYSHARE Ni-MH Rechargeable Battery Pack. If you place the camera in the Camera Dock with any other type of batteries, rechargable or not, no charging takes place. Charging Lights on Dock II battery partially charged battery low battery fully charged 57 Chapter 8 Transferring Pictures To transfer pictures from your camera to your computer: 1 Turn off the camera and place the camera in the Camera Dock. 2 Push the Connect button. The Power/Transfer light blinks green while the pictures are transferring. Charging is suspended during transfer. 3 For details on transferring, organizing, printing, emailing, and editing your pictures, see the Quick Start Guide or the KODAK EASYSHARE Software Help. NOTE: When your pictures are transferred, leave the camera in the Camera Dock. Eight minutes after the transfer is complete, the Camera Dock resumes charging as necessary. Caution When Using a Tripod Do not connect a tripod to the Camera Dock. Remove the camera from the Camera Dock and connect the tripod directly to the camera. Connect Power/Transfer light blinks 58 Chapter 8 Earlier Camera Dock Model If you have the KODAK EASYSHARE Camera Dock, not the Camera Dock II, the functionality is exactly the same as described in this chapter. The only difference is that the earlier Camera Dock has one indicator light. Indicator light status: Steady green—camera is properly seated in the Camera Dock. Blinking green— pictures are transferring. Steady red—Battery Pack is charging. Blinking red—error condition. Indicator light 9 Troubleshooting This chapter contains help for your KODAK EASYSHARE CX4300 Digital Camera or Camera Dock II. Additional technical information is available in the ReadMe file located on the KODAK EASYSHARE Software CD. For updates to Troubleshooting information, visit our Web site at Troubleshooting—Camera Camera Problems Camera Problem Cause Solution Camera does not turn on. Battery is not properly installed. Remove and reinstall the batteries (page 5). Battery is not charged. Replace or recharge the batteries (page 5, page 56). On/Off switch is not completely in the On position. Turn the camera off then back on (page 6). Camera does not turn on in cold temperatures. The camera has been exposed to temperatures close to the lower operating range. Remove the batteries and slowly return the camera and batteries to room temperature. Reinstall or replace the batteries (page 5). Chapter 9 Camera Problem Cause Solution Camera does not turn off. Alkaline batteries were installed in the camera. DO NOT USE ALKALINE BATTERIES. Turn ...