Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Troubleshooting If... Try one or more of the following In Review mode, ¦ Check the image storage location setting (see page 24). you do not see a picture (or the expected picture) on the LCD screen. In Review mode, a ¦ Transfer the picture to the computer (see page 36), then format the blue or black card in the camera (see page 26). screen is displayed Caution: Formatting a card deletes all pictures and videos, instead of a including protected files. picture. Shutter button does not work. ¦ Turn on the camera (see page 2). ¦ Transfer pictures to the computer (see page 36), delete pictures from the camera (see page 14), switch image storage locations (see page 24), or insert a card with available memory (see page 3). ¦ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ¦ Decrease Exposure Compensation (see page 27). Picture is too light. Picture is not clear. ¦ Clean the lens (see page 50). ¦ Make sure your camera is not in Close-up mode. ¦ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ¦ Place the camera on a flat, steady surface or use a tripod. Picture is too dark. ¦ Turn on the flash (see page 7). ¦ Move so there is no more than 11.8 ft (3.6 m) in wide angle and 6.9 ft (2.1 m) in telephoto between the camera and the subject. ¦ Use Fill flash (see page 7) or change your position so light is not behind the subject. ¦ Increase Exposure Compensation (see page 27). Troubleshooting If... Try one or more of the following Camera does not recognize SD/MMC card. ¦ Purchase a certified SD/MMC card. ¦ Reformat the card (see page 26). Caution: Formatting a card deletes all pictures and videos, including protected files. ¦ Insert a card into the slot, then push to seat (see page 3). Camera freezes up when a card is inserted or removed. ¦ Turn the camera off, then back on. Make sure the camera is turned off before inserting or removing a card. Memory card full. ¦ Insert a new card (see page 3), transfer pictures to the computer (see page 36), or delete pictures (see page 14). Memory card and internal memory full. ¦ Transfer pictures to the computer (see page 36), then format the card or internal memory (see page 26). Caution: Formatting a card deletes all pictures and videos, including protected files. Camera/computer communications If... Try one or more of the following The computer does not communicate with the camera. ¦ Visit ¦ Turn on the camera (see page 2). ¦ Install new batteries (see page 1) or charge rechargeable batteries. ¦ Connect the USB cable to camera and computer port (see page 36). ¦ Install the software (see page 35). ¦ Disconnect the USB cable. Close all software applications. Re-install the software (see page 35). ¦ Disconnect camera from the computer. Close all software applications, reconnect camera. Troubleshooting If... Try one or more of the following Cannot transfer pictures. (The Add New Hardware Wizard cannot locate drivers.) ¦ Disconnect the USB cable. (If using camera dock or printer dock, disconnect cable and remove camera from dock). Close all open applications. Re-install the software (see page 35). ¦ Disconnect the USB cable. Close all software applications. Re-install the software (see page 35). LCD screen messages If... Try one or more of the following No images to display ¦ Change image storage location setting (see page 24). Memory card requires formatting ¦ Insert a new card (see page 3) or format the card (see page 26). Caution: Formatting a card deletes all pictures and videos, including protected files. Memory card cannot be read (Please format memory card or insert another card) Only one USB connection allowed. Disconnect cable or rem. (remove) camera from dock. ¦ Unplug the USB cable from the camera. Troubleshooting If... Try one or more of the following Internal memory requires formatting ¦ Format the internal memory (see page 26). Caution: Formatting deletes all pictures and videos, including protected files. (Formatting internal memory also deletes email addresses, album names, and Favorites. To restore them, see the Internal memory cannot be read Kodak EasyShare software Help.) (Please format internal memory) No memory card (Files not copied) ¦ Insert a card (see page 3). Not enough space to copy files (Files not copied) ¦ Delete pictures from the image storage location you are copying to (see page 14), or insert a new card (see page 3). Memory card is locked (Insert new memory card) ¦ Insert a new card (see page 3), move the switch on the card to unlock the card, or change the image storage location to internal memory (see page 24). Read-only memory card. Remove write protection to capture or write to card. Memory card is unusable (Insert new memory card) ¦ Insert a new card (see page 3) or format the card (see page 26). Caution: Formatting a card deletes all pictures and videos, including pr...