Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. Fully discharge the battery pack once, then charge it to correct the indication. The indicator may not be accurate depending on the conditions of use. • The battery pack is dead (page 132). Replace it with a new one. Cannot charge the battery pack. • You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery charger to charge the battery. The CHARGE lamp flashes while charging the battery. • Remove and reinsert the battery pack, making sure it is installed correctly. • The temperature may be inappropriate for charging. Try charging the battery pack again within the proper charging temperature range (10 °C to 30 °C (50 °F to 86 °F)). • Refer to page 133 for details. Shooting still images/movies Cannot record images. • Check the free capacity of the internal memory or memory card. If it is full, do one of the following: – Delete unnecessary images (page 41). – Change the memory card. • You cannot record images while charging the flash. • For recording movies, it is recommended that you use a memory card of 1 GB or larger. • Set [Demo Mode] to [Off] (page 88). Smile Shutter function does not work. • No image is shot if a smiling face is not detected. • Set [Demo Mode] to [Off] (page 88). Anti-blur function does not work. • The anti-blur function may not work properly when shooting night scenes. • Shoot after pressing the shutter button halfway down. Recording takes a long time. • When the shutter speed becomes slower than a certain speed in low light conditions, the NR (Noise Reduction) slow shutter function is activated automatically to reduce the image noise. Under such conditions, recording takes a long time. • The Anti Blink function is working. Reset [Anti Blink] to [Off] (page 66). The image is out of focus. • The subject is too close. When shooting, make sure to position the lens farther away from the subject than the shortest shooting distance (approximately 5 cm (2 inches) (W)/50 cm (19 3/4 inches) (T) (DSC-W380/W390), 4 cm (1 5/8 inches) (W)/60 cm (23 5/8 inches) (T) (DSC-W350/W360) from the lens). • (Twilight), (Landscape) or (Fireworks) (DSC-W380/W390 only) mode is selected in the Scene Selection when shooting still images. Table of contents Operation Search MENU/Search Index 118GB Zoom does not work. Zoom does not work. You cannot use the optical zoom when shooting in Sweep Panorama. • You cannot use the Smart zoom depending on the image size (page 81). • You cannot use the digital zoom when: – Shooting movies. – The Smile Shutter is working. – The self-timer is set to [Self-portrait One Person] or [Self-portrait Two People]. Cannot select the Face Detection function. • You can select Face Detection only when the focus mode is set to [Multi AF] and the metering mode is set to [Multi]. The flash does not work. • You cannot use the flash when: – Burst mode is selected (page 50). – (High Sensitivity), (Twilight) or (Fireworks) (DSC-W380/W390 only) mode is selected in Scene Selection. – In Sweep Panorama – In Movie Mode • Set the flash to (On) (page 35) when the Scene Selection mode is set to (Landscape), (Gourmet), (Pet), (Beach), (Snow) or (Underwater) mode. Fuzzy white circular spots appear in images shot using the flash. • Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a malfunction. The close-up shoot function (Macro) does not work. • The camera automatically adjusts the focus. Press and hold the shutter button halfway down. Focus adjustment may take some time when shooting a close subject. • (Landscape), (Twilight) or (Fireworks) (DSC-W380/W390 only) mode is selected in the Scene Selection. The date and time are not displayed on the LCD screen. • While shooting, the date and time are not displayed. They are displayed only during playback. Cannot insert dates on images. • This camera does not have a feature for superimposing dates on images. By using “PMB”, you can print or save images with the date (page 109). The F value and shutter speed flash when you press and hold the shutter button halfway down. • The exposure is incorrect. Correct the exposure (page 51). The image colors are not correct. • Adjust the White Balance (page 54). 119GB Table of contents Operation Search MENU/Search Index White or purple streaks appear in bright areas of the subject, or the whole screen of the image becomes reddish. White or purple streaks appear in bright areas of the subject, or the whole screen of the image becomes reddish. This phenomenon is called smearing. This is not a malfunction. Smearing is not recorded on still images, but is recorded as streaks or uneven colors on Sweep Panorama images or movies. (“Bright areas” refers to the sun or electric lights which are much brighter than surroundings.) Noise appears in the image when you view the screen in a dark place. • The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There i...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-W350 (1.94 mb)
Kameras - DSC-W360 (1.94 mb)
Kameras - DSC-W380 (1.94 mb)